Cascadia_302
Member
- Thread starter
- #1
So with 775 miles and only six weeks old I discover not one but two new distinct sounds coming from the engine. The attached video represents these two sounds fairly well I believe.
I do notice that at cold start-up both sounds are either not present or not detectable due to the higher RPMs and engine sound.
The first more noticeable sound is the rapid ticking or the infamous BBQ igniter noise, this sound appears to emanate from the center of the engine almost directly above the throttle body.
The second sound is like a bearing that is failing, kinda like a scraping sound. This noise is noticeable on the video if you listen as I move the camera around at certain locations.
Have yet to make a service appt but will very soon.
Anyone that has experienced this or has heard these sounds before please input.
http://s968.photobucket.com/user/jdk829/media/Engine%20noises_zps5gorkp0q.mp4.html
I do notice that at cold start-up both sounds are either not present or not detectable due to the higher RPMs and engine sound.
The first more noticeable sound is the rapid ticking or the infamous BBQ igniter noise, this sound appears to emanate from the center of the engine almost directly above the throttle body.
The second sound is like a bearing that is failing, kinda like a scraping sound. This noise is noticeable on the video if you listen as I move the camera around at certain locations.
Have yet to make a service appt but will very soon.
Anyone that has experienced this or has heard these sounds before please input.
http://s968.photobucket.com/user/jdk829/media/Engine%20noises_zps5gorkp0q.mp4.html
Sponsored