Hey I checked the old purge valve for gunk in it, all I found was a little bit of maybe oil in the side where the I ring sits, the other parts were clean and no bent pinsRemove the vapor line from the Purge valve and see if there is fuel or oil in it. Also inspect the electrical connector for corrosion, bent or pushed out pins.
How about the electrical connector? Look at the tiny tabs inside the connector and make sure they arent pushed out, corroded, damagedHey I checked the old purge valve for gunk in it, all I found was a little bit of maybe oil in the side where the I ring sits, the other parts were clean and no bent pins
![]()
I would use a mechanics stethoscope and narrow the noise down. Kinda sounds like injectors.. Here's a video of the ticking
I would use a mechanics stethoscope and narrow the noise down. Kinda sounds like injectors.
See Post #8. He pulled the plug on the valve and it stopped ticking