Triple Wile E
Paxton'd Wile E
- Thread starter
- #1
I got my Viking Crusaders through Kelly @ BMR Wednesday got em installed and I must say they made an awesome difference in my 60ft unfortunately my local track was doing no prep street racing last night and wasn't giving any slips. Kelly did help me with out to with adjusting these shocks but I'm still fine tuning em. So special thanks again Kelly and the crew at BMR you guys know suspension. I did get a video of the run last night. The car I'm running traps 117 and got me by a bumper real close race.Shocks are set on 10c 7rhttp://vid222.photobucket.com/albums/dd60/nismohardbodysr20/Wile E making passes.mp4
I will be adding more videos as I keep tuning the shocks in and adding suspension mods. So stay tuned can't wait to get that 60ft down even less.
NEW VIDEOS HERE:______
v
V
Here is a pass i made with launching off the rev limiter it hooked up pretty good but torque management kicked in on me shortly after launch. Shocks are set on 12c 7r
http://vid222.photobucket.com/albums/dd60/nismohardbodysr20/IMG_4796.mp4
Here is a pass I made launching at 6500 and pulled a 1.7 60ft with the 19'' DR's I'm pretty impressed with the stock irs and can't wait to start adding bushings to see if I can get the rest of the hop gone. Shocks are set at 12c 7r.
http://vid222.photobucket.com/albums/dd60/nismohardbodysr20/IMG_4792.mp4
Here is a pass I made launching at 6500 and pulled another 1.7 60ft withe the 19's shocks are set at 13c 9R
http://vid222.photobucket.com/albums/dd60/nismohardbodysr20/Video.mp4
Here is another pass off the rev limiter pulled a 1.8 60ft and pulled the fuse for the abs so torque management wouldn't be a problem. Shocks set at 13c 9r.
http://vid222.photobucket.com/albums/dd60/nismohardbodysr20/Video-5.mp4
I will be adding more videos as I keep tuning the shocks in and adding suspension mods. So stay tuned can't wait to get that 60ft down even less.
NEW VIDEOS HERE:______
v
V
Here is a pass i made with launching off the rev limiter it hooked up pretty good but torque management kicked in on me shortly after launch. Shocks are set on 12c 7r
http://vid222.photobucket.com/albums/dd60/nismohardbodysr20/IMG_4796.mp4
Here is a pass I made launching at 6500 and pulled a 1.7 60ft with the 19'' DR's I'm pretty impressed with the stock irs and can't wait to start adding bushings to see if I can get the rest of the hop gone. Shocks are set at 12c 7r.
http://vid222.photobucket.com/albums/dd60/nismohardbodysr20/IMG_4792.mp4
Here is a pass I made launching at 6500 and pulled another 1.7 60ft withe the 19's shocks are set at 13c 9R
http://vid222.photobucket.com/albums/dd60/nismohardbodysr20/Video.mp4
Here is another pass off the rev limiter pulled a 1.8 60ft and pulled the fuse for the abs so torque management wouldn't be a problem. Shocks set at 13c 9r.
http://vid222.photobucket.com/albums/dd60/nismohardbodysr20/Video-5.mp4
Sponsored
Last edited: