What did you do to your GT350 today?

[lfunk11]

Where did you get those lug nuts? They are sweet. Looking for a replacement for my rusted OEM!

https://www.exhibitionsofspeed.net/...lac-CT5-V-Blackwing-Titanium-Lug-Nuts-M14x1-5

They took a while to get, but I love the look. Not cheap though lol

Sponsored

 

[Lorne34]

I gave myself time to do it and stopped the first attempt when I became frustrated. My biggest issue was trying to get the little screws on and off that hold the front bumper on behind the wheel well liner.

I have watched some videos and they recommend getting the car off the ground, and removing the wheels. I have been procrastinating on getting a quick jack system. I know a lot of guys say just get a jack and some jack stands, but I like the idea of the quick lift system and the fact that it can just sit on the floor in my designated parking space in the garage as I have limited space

 

[lfunk11]

I have watched some videos and they recommend getting the car off the ground, and removing the wheels. I have been procrastinating on getting a quick jack system. I know a lot of guys say just get a jack and some jack stands, but I like the idea of the quick lift system and the fact that it can just sit on the floor in my designated parking space in the garage as I have limited space

I love my quickjack. I have anxiety at my age crawling under cars on jack stands! It even works on my Ram 1500.

 

[Postal Bob]

Just a basic car cover and let it sit? Do you find it getting a lot of surface rust underneath or in the engine bay area? No deep freeze issues?

No, a Covercraft outdoor cover. Once the snow melts a little, and freezes to the cover, you can do more damage trying to get it off. Besides, the car is ceramic coated, and gets a touch-up just before storage.
No rust anywhere. Car sits on flatstopper ramps. And rust usually happens when road salt gets on underside. Car is never driven until all road salt is washed away by 2 rainstorms just to be sure.
No deep freeze issues. And we had temps get down to single digits at night this winter.

 

[T7TheLama]

Got my car back to manual and added a mgw short throw + steeda clutch lines before adding a whipple.

Also got my center console wrapped in Alcantara.

 

[DCShelby]

Where did you source the alcantra from? I thought of doing my side pieces on the center stack

 

[Kachow]

Got my car back to manual and added a mgw short throw + steeda clutch lines before adding a whipple.

Also got my center console wrapped in Alcantara.

How’s the MGW over stock? I’ll be doing this soon as well!!!

 

[T7TheLama]

Where did you source the alcantra from? I thought of doing my side pieces on the center stack

Local shop in Austria that are specialized in that kind of stuff did it for me.

 

[T7TheLama]

How’s the MGW over stock? I’ll be doing this soon as well!!!

It feels much more precise than the stock one.

Quality is top notch although the rubber boot is a huge pain to install!

 

[lfunk11]

How’s the MGW over stock? I’ll be doing this soon as well!!!

Mine came with it, but I love it. I just added a weighted shift knob and it even made it nicer!

 

[edunn14]

Filled up the daily with 87, and looking at the 93 prices. Hardening my resolve for filling up the Shelby tomorrow

Having two vehicles that get under 20mpg city is . . . Something. Such is life

 

[galaxy]

Mine came with it, but I love it. I just added a weighted shift knob and it even made it nicer!

A good weighted shift knob is one of those low publicity/high impact quality of life things that you don't think you need until you experience it, and then you wonder how you lived without it.

I have the HAMMER and it is quite incredible. It truly is the little things. And it actually flows pretty well with the color of the trim throughout the center console, thus it doesn't really scream aftermarket.

https://www.mgwshifters.com/knobs/hammer

 

[callmond]

We had a customer share this video of his Voodoo-swapped Fox body with our cams for the flat-plane crank firing order. You can hear just a hint of thump in there, but it's distinct from the cross plane version.

3-4 second spool times aren't too shabby either!

 

[Kachow]

Glad to see so many great reviews of the MGW! Stoked to have mine installed.

Man, only thing that comes close to the Voodoo is a cammed car. Sounds goooooooood at idle.

 

[wingnutt]

We had a customer share this video of his Voodoo-swapped Fox body with our cams for the flat-plane crank firing order. You can hear just a hint of thump in there, but it's distinct from the cross plane version.

3-4 second spool times aren't too shabby either!

…well there’s something you don’t see everyday!

Sponsored