What did you do to your S550 Mustang today?!

[BlkMach10510]

Nice, another PP2 owner, not many of us. You did save 10-15K probabaly on the pp2. I had a M1 before my PP2.

I had a C7 before my Mach 1.

Sponsored

 

[TonyT930]

Well I installed the MMR engine block/bell housing brackets today. It went well. I just hope that the oil pan seal didnt break seal and ends up leaking. I torqued the oil pan bolts to spec with some blue loc tite

 

[drunkenup]

Nice, another PP2 owner, not many of us. You did save 10-15K probabaly on the pp2. I had a M1 before my PP2.

I want to modify it as little as possible for the track, so the oil cooler and camber plates on the M1 would have been nice, but I will add those for a fraction of the upgrade premium. Also, I actually prefer the MT82 after having driven both. The tremec shifts like my BMW did, too notchy for me.

 

[5doorsoffury]

swapping out my 3.2 pully and e85 for my 3.5 and boostane for the winter. takeing my mt radials off and putting on the oem 235 all seasons. i feel like im being punished lol i hate winter.

 

[GrabberBargeCaptain]

swapping out my 3.2 pully and e85 for my 3.5 and boostane for the winter. takeing my mt radials off and putting on the oem 235 all seasons. i feel like im being punished lol i hate winter.

what state?

 

[cerbomark]

I want to modify it as little as possible for the track, so the oil cooler and camber plates on the M1 would have been nice, but I will add those for a fraction of the upgrade premium. Also, I actually prefer the MT82 after having driven both. The tremec shifts like my BMW did, too notchy for me.

I m trying not to modify so if I trade out it will be an unmolested pp2 car. I can t understand how the lowest production s550 does not have more value? I also had the tremec and the mt82, I m sure the tremec may be stronger for extreme situations but do not feel any measurable difference street driving. How did you even find that car on carvana? I searched pp2 s and nothing?

 

[Kevin08]

Pulled a wheel off when I did my oil change today. One look at the longitudinal cracking inside the tread grooves of this tire and I knew it was time. Ordered my new wheels and tires, and two new OE front hubs since I had cut my wheel studs down for the steeda wheel spacers. It is actually cheaper to buy the entire hub assembly than individual OE wheel studs - make it make sense. Hoping I can get $400 for my OE PP wheels locally, which might pay for..one of the new wheels.

 

[OLD8BA]

It is actually cheaper to buy the entire hub assembly than individual OE wheel studs - make it make sense.

GOOD TIP

 

[TonyT930]

Pulled a wheel off when I did my oil change today. One look at the longitudinal cracking inside the tread grooves of this tire and I knew it was time. Ordered my new wheels and tires, and two new OE front hubs since I had cut my wheel studs down for the steeda wheel spacers. It is actually cheaper to buy the entire hub assembly than individual OE wheel studs - make it make sense. Hoping I can get $400 for my OE PP wheels locally, which might pay for..one of the new wheels.

I bet that is a Michelin tire, right?

 

[Kevin08]

I bet that is a Michelin tire, right?

Factory PS4S from 2019.

 

[txgt]

Parts day!

 

[Stam616]

Installed front and rear adjustable sway bars from Predders and they’re great!

 

[Kevin08]

Yoinked this out today after 6 years.

 

[LCK22GT]

Drove it around town this afternoon. I’m taking every chance I get before she gets her oil change and gets stored for the winter. I figure that’s in 2 or 3 weeks.

 

[Justpassingas]

Drove it around town this afternoon. I’m taking every chance I get before she gets her oil change and gets stored for the winter. I figure that’s in 2 or 3 weeks.

And then the PMS will start….
PARKED MUSTANG SYNDROME

Sponsored