What did you do to your S550 Mustang today?!

[Virnman]

Decided to swap out the factory 3.5’s made out of tissue paper with some JBL’s. Night & day difference & I haven’t turned off the EQ in Forscan yet.

Sponsored

 

[YBLEHSGT350R]

Interested in this process.

 

[ice445]

Decided to swap out the factory 3.5’s made out of tissue paper with some JBL’s. Night & day difference & I haven’t turned off the EQ in Forscan yet.

I wanna do this but I'm terrified of creating new rattles later, lol. I guess you can just order and replace all the clips you unseat. FYI some people think that center speaker ruins the soundstage, try unplugging it to see if you like it better gone.

 

[FLfree]

The alcantara dash bits a kit? looks great

Sold individually on Amazon

 

[kiksbutt]

I believe they fit up to current year, 2022. Fit perfectly into the car without any issue other than the connectors needing a little more pressure to seat in properly compared to oem. Other than that perfect fit.

oh they'll fit but the design is different. Aslong as you're okay with that that's all. Some folks messed up since they're more curved on 2018+

 

[Moonhowl]

I removed the hood prop rod today. I felt kind of stupid, because I installed the Redline hood struts a few weeks ago, and when I finished, it never occurred to me to remove the factory prop rod. Maybe Redline should add that step to the instruction video. Anyone else forget to do this?

 

[GTP]

I removed the hood prop rod today. I felt kind of stupid, because I installed the Redline hood struts a few weeks ago, and when I finished, it never occurred to me to remove the factory prop rod. Maybe Redline should add that step to the instruction video. Anyone else forget to do this?

I removed mine at first, but there wasn't a good place to store it. So I decided to store it right back where it came from.

Besides, if the struts age and don't lift as hard in the cold, or if I'm on the side of the road in high winds, I'll use the prop rod again.

 

[Bikeman315]

I removed mine at first, but there wasn't a good place to store it. So I decided to store it right back where it came from.

Besides, if the struts age and don't lift as hard in the cold, or if I'm on the side of the road in high winds, I'll use the prop rod again.

So how much slower is your car after putting the rod back on? Did you see a decrease in gas mileage?

 

[Vertex]

oh they'll fit but the design is different. Aslong as you're okay with that that's all. Some folks messed up since they're more curved on 2018+

I see what you’re talking about now. I’ll live with it for now. Maybe wait a bit till the ford ones become available and swap to those as I know I can get them for near cost. Sucks I didn’t notice this prior to ordering and installing but oh well. Still looks good just not as aggressive.

 

[KingKona]

Decided to swap out the factory 3.5’s made out of tissue paper with some JBL’s. Night & day difference & I haven’t turned off the EQ in Forscan yet.

Can you share more info please?

What's the difference in sound? Which JBL speakers? Model number? From where?

 

[GTP]

So how much slower is your car after putting the rod back on? Did you see a decrease in gas mileage?

None from the rod, but certainly from all the other bolt-ons!

 

[DrZed]

Can you share more info please?

What's the difference in sound? Which JBL speakers? Model number? From where?

... for your consideration. Those 3.5s look like JBL 89db sensitivity speakers. If you're going to keep the factory headunit (amp), I found a higher sensitivity speaker (louder at the lower wattage levels) worked much better for me and balanced well with the other factory speakers I kept. I used Hertz DCX 87.3 speaker at 91 dB, and yes, incredible difference. I replaced the two in the door and will do the centre stack next (disconnected right now). Always add the 600Hz in line bass blockers... I tried both with and without and the 600Hz clears up so much distortion, you can't believe it until you try it both ways.

(edit: and I disconnected the factory tweeters at the same time)

2x Hertz 87.3 speakers $80 CDN and 600Hz bass blockers $13 CDN.

See my post about it here... another option for consideration.

https://www.mustang6g.com/forums/threads/fixed-help-installed-mids-9-speaker-no-sound.164055/

 

[DrZed]

Sold individually on Amazon

https://www.amazon.ca/Arotom-Alcant...tara+interior+mustang+dash,aps,51&sr=8-1&th=1

Cool stuff

 

[KingKona]

... for your consideration. Those 3.5s look like JBL 89db sensitivity speakers. If you're going to keep the factory headunit (amp), I found a higher sensitivity speaker (louder at the lower wattage levels) worked much better for me and balanced well with the other factory speakers I kept. I used Hertz DCX 87.3 speaker at 91 dB, and yes, incredible difference. I replaced the two in the door and will do the centre stack next (disconnected right now). Always add the 600Hz in line bass blockers... I tried both with and without and the 600Hz clears up so much distortion, you can't believe it until you try it both ways.

2x Hertz 87.3 speakers $80 CDN and 600Hz bass blockers $13 CDN.

See my post about it here... another option for consideration.

https://www.mustang6g.com/forums/threads/fixed-help-installed-mids-9-speaker-no-sound.164055/

I wish I could understand the things you've posted here. Can you clarify for someone that doesn't speak "audio"??? I've highlighted in red the parts that mean nothing to me.

I'm looking for something that is easy for a complete noob to install, not to tear out the entire system and replace it. Just speakers really.

What is the sound difference? I want to stop the sound from breaking up when I crank the music. And stop the buzzing and rattling.

 

[DrZed]

I wish I could understand the things you've posted here. Can you clarify for someone that doesn't speak "audio"??? I've highlighted in red the parts that mean nothing to me.

I'm looking for something that is easy for a complete noob to install, not to tear out the entire system and replace it. Just speakers really.

What is the sound difference? I want to stop the sound from breaking up when I crank the music. And stop the buzzing and rattling.

Here is what I used:

https://www.crutchfield.ca/p_301DCX873/Hertz-DCX-87-3.html
https://www.crutchfield.ca/p_007BB600/Crutchfield-Bass-Blockers-600-Hz-cut-off.html

Some minor modifications of the plastic housing, but super easy. Reach out, we'll help you along.

Sponsored