Coyote Chase
Well-Known Member
Excellent! Keep us posted on your progress!! ThanksThe 2.0 closed deck.
Sponsored
Excellent! Keep us posted on your progress!! ThanksThe 2.0 closed deck.
Hmmm. Not too sure. This ones the budget build and I know that the others are customizable and have longer build times. However, the shop my car is at was able to pull some strings and get it shipped extremely quicklyHe said i need wait for 2-3 month to have that engine manufactured
What else you got? Camshafts, springs, clutch, engine parts?Hmmm. Not too sure. This ones the budget build and I know that the others are customizable and have longer build times. However, the shop my car is at was able to pull some strings and get it shipped extremely quickly
It’s stock heads with the babubu shortblock. The specs are on their website. https://engineeredmotorsportsolutions.com/index.php/product-category/engine-parts/. Pretty simple setupWhat else you got? Camshafts, springs, clutch, engine parts?
Assume website, cool looking T-shirt!It’s stock heads with the babubu shortblock. The specs are on their website. https://engineeredmotorsportsolutions.com/index.php/product-category/engine-parts/. Pretty simple setup
Well, it's not mine, I just know what he bought.Excellent! Keep us posted on your progress!! Thanks
ETSAssume website, cool looking T-shirt!
PS: Which intercooler are you using?
Thanks
What I’ve seen is that it’s the same motor as the mustang..?I see the new Bronco has a 2.0 block. Does anyone know if the Bronco block is stronger than the Mustang 2.3 block ? I would think a 2.0 block used in an off road vehicle like a Bronco would have to be a more robust block.
The 2.0 block has a closed deck which is quite a bit stronger. If the Bronco is using it, there's a good reason.I see the new Bronco has a 2.0 block. Does anyone know if the Bronco block is stronger than the Mustang 2.3 block ? I would think a 2.0 block used in an off road vehicle like a Bronco would have to be a more robust block.
The Bronco has either a 2.3L (but 300 hp, probably tuned more like the Ranger) or the optional 330hp twin-turbo 2.7L V6.The 2.0 block has a closed deck which is quite a bit stronger. If the Bronco is using it, there's a good reason.
Looking good!! Do you have a projected horsepower at the wheel??Update on the built motor: engine has been fully assembled and put back into the car. Nx2 turbo and tune plus wastegate has been installed and I believe we are now waiting on the intake manifold and the rest of the bolt ons to be installed. I’ll keep y’all posted
Fuel injection should limit my power pretty significantly and I will only be running 91 so I’m guessing around 350-370 whp. Down the line gonna get a hpfp and will be pushing sub 500sLooking good!! Do you have a projected horsepower at the wheel??
350/370 whp should be obtainable without to much trouble. Which bolt ons are you adding to your new built short block?Fuel injection should limit my power pretty significantly and I will only be running 91 so I’m guessing around 350-370 whp. Down the line gonna get a hpfp and will be pushing sub 500s