What did you do to your S550 Mustang today?!

[StangTime]

Finally got my Ford Perf. catch can installed. Bought used. The seller unknowingly left the mounting stud on the car he sold. So I was left trying to find a replacement. After searching and obtaining an actual part#, I was going to get from Tasca but they wanted $20 to mail a $2 part. My local dealer was going to take weeks to get one. Then I had an epiphany. I remembered seeing these studs on the valve covers for holding the wiring harness. I found one stud that wasn't being used at the front of the passenger valve cover, swapped it with the valve cover bolt that gets removed to install the bracket and bingo, problem solved.

The stud that was here was swapped for the bolt shown to install the bracket.

Valve stud in it's new home being used to attach the bracket with a new locknut.

The install of the bracket calls for pulling a wire harness anchor from a stud by the valve head, removing a nut, installing the bracket, and using the nut to secure. The thickness of the bracket in place makes this stud too short to press the wire harness anchor back into place. So I used a wire tie to secure it.

Now complete!

Next is to trim the engine cover down and do some paint work on it.

Sponsored

 

[gadgtfreek]

Installed an eight ball looking steeda shift knob on the manual transmission.

 

[Rapid Red]

I would make sure, when installing my ignition switch remote power on for my amplifier I discovered the passenger kick panel breaker box is not the same as previous years and the includes the 2019.

I'm not thinking their will be any difference, 2018 to present. See you live in GA . I'll bet you beer and drive over to collect my winnings LOL

 

[oneheadlite]

...moved it out of the way to
get a Harley out to ride...............

 

[Mr. Met]

Finally installed Velossa Tech big mouth. Cutout the back of the grille. I made a mess of the other side but looks pretty good from the front.

 

[CJJon]

Took out the back seat to get ready to install a Watson roll cage.

Getting prepped for the Whipple install and added these to replace the one hanging on the left which left marks all over the finish. Would love a jacket made out of this stuff! Super supple and soft. Matches the color of the car well too. Has some magnets and hooks on elastic.

Murphy approves:

 

[Arknsawchuck]

I bought these and they sound great but there are a lot of choices of drop ins. https://www.crutchfield.com/p_108R6532EM/Infinity-Reference-REF-6532ex.html?l=E
Enter your car and year information on the Crutchfield site and they will show you everything that fits properly without any modifications.

Thanks, I'll give Crutchfield a shot. Forgot all about them.

 

[Interceptor]

The pet seems to be happy with your progress.
Might want to apply some dynomat type material to floors since you have it all cleared out. Stop some of the road noise

 

[Decanes]

Ordered UPR dual oil catch can kit for Christmas lol then cleaned garage up but it needs a lot more

 

[treecutter]

I gave it it's weekly charging and emptied all the mouse traps around it. can't wait till spring.

 

[Carzzi]

Got bronze SVE X500's with Goodyear Exhilarate AS put on.

 

[shinoda]

I'm from the generation where graphics, emblems, and callouts meant everything, so I created and started to put my own custom "Mustang HPP" (High Performance Package) graphics on... Only added the trunk graphic so far. Waiting on the hood and side stripe graphics to be produced.

 

[Decanes]

Ordered blacked out fender badges and blacked out pony for grill

 

[Decanes]

millennial anti-theft device

Sponsored