What did you do to your S550 Mustang today?!

[UnkTob]

Was disgusted by the engine cover atrocity on my 2020.

So, ordered the Bullitt "fuel rail covers", then did a big trim of the factory cover only retaining the center section.

Also did a sound tube delete while I was there.

Thoughts?

20201021_144836 by chefjpd, on Flickr

20201021_153408 by chefjpd, on Flickr

20201021_153423 by chefjpd, on Flickr

And, while I was there, I plasti dipped the tops of the headlights. No reason to light up under the hood.

20201021_153432 by chefjpd, on Flickr

They were $125, but included those big hoses that lay on them (which are not needed)

Oh hell yeah! I did a bunch of vinyl stuff to my 2018 cover, which made it look a little better, but already most of the vinyl is coming off, despite 90 MINUTES OF CLEANING AND PREPPING! Ugh. I like this look MUCH better! I will probably do similar, and I'll reference you in my build blog.

I can't find those online. Do you mind sharing where you bought them and/or part number?

Thanks!

Sponsored

 

[Chef jpd]

@UnkTob

Engine cover overlays

Also, here is how I did the trim from the bottom.

20201021_144845 by chefjpd, on Flickr

 

[UnkTob]

@Chef jpd Thanks, but I wasn't very clear. Sorry. I was asking for the part numbers and/or where you bought the Bullitt covers.
Actually, I found these on CJ Pony Parts. https://www.cjponyparts.com/ford-pe...-5-0l-2011-2017-5-2l-2015-2020/p/M6P067M50BL/
I think for my build I might get these and paint them red. I'll try to mask off all the lettering so the letters stay black.

 

[Chef jpd]

@UnkTob

The ones you quoted are for gen 2 5.0
You want these:
Bullitt covers

Got mine from CJ pony parts as well.

 

[Farkel]

Got my Flameball knobs today! Not the greatest lighting in the pictures, but the flames and the flat stick are blue. Now to decide which one to use on a given day...

 

[UnkTob]

@Chef jpd- Ah. Thanks. I did miss read that. Was hoping to save some $ and find something else that didn't come with the extra unnecessary hoses.

Not sure if I'll paint the lettering red or the covers red, leaving the lettering. (Seeing how the letters stand off, not sure how easy or difficult it would be to mask one way or the other. I'll have to play around once I get them.)

 

[WildHorse]

Had em. Didn't like them. So the end result was getting it professionally fixed. After, they're gonna paint correction & ceramic coat the whole shebang. Then, it's getting put away for the winter.

Like brand new

 

[Decanes]

Me and the wife took a nice 2 hour drive though back road here in Ohio
Then gave the Mustang a bath

 

[samd1351]

Got my Flameball knobs today! Not the greatest lighting in the pictures, but the flames and the flat stick are blue. Now to decide which one to use on a given day...

The dark ones on top look killer

 

[Farkel]

The dark ones on top look killer

Thank you. That's the one I left on, at least for now.

 

[HoosierDaddy]

Yesterday, drove it to the dentist to get a crown for a cracked tooth.

The dentist used a 3D scanner to generate a 3D model of the relevant parts of my mouth. An app designs a crown with a perfect fit for the stub it goes on as well as surrounding teeth and bite.

That is fed into a CNC machine that carves the crown out of a blank. Absolute perfect fit, unlike a crown that starts as two impressions (original tooth, and stub the crown will go over) sent to a lab where numerous human steps culminate with a crown that often has less than optimal fit around the base or needs to be ground to get a perfect bite.

Glad the dentist took the time to fire up the app again after the fact and show the digital images from different angles for me to record.

 

[WildHorse]

 

[BlackZilla5.0]

Installed a new rear diffuser and tips. Was a nightmare trying to get everything aligned and perfect but it eventually got done. Very satisfied with the results. Looks really aggressive in the rear of my PP2.

 

[BlackZilla5.0]

I gotta ask. How do you get out of the car once parked in the garage? That is a good look though I like it. NIce job.

Lol. My garage is small but I can manage to get in and out just fine. Thanks for the compliment.

 

[FreePenguin]

Got my new wheels on today, slight issue though. the lug nuts work from my old wheels, I want them on it. but the sockets! will not fit into the hole to tighten them down. I have a 19mm thin wall socket, its like the same size as the hole, so damn close. but no cigar.

is there an awesome ultra ultra thin walled 19 or 3/4 socket? I dont know which is bigger or smaller, but both those sizes fit this lgunut.


before

after

Sponsored