2019 Procharger P1SC-1

[acere23]

I j stalled a TiAl q50 in the exact same location as the factory bov pipe with great results. Score and after picture for comparison.

Nice.buying one right now.. what spring are you using?

Sponsored

 

[acere23]

Is that the Procharger supplied air filter? Looks bigger?

it does...I ended up using a spectre filter.

 

[TGGT]

Looks like prochargers air filter

 

[Toy Cobra]

Nice.buying one right now.. what spring are you using?

Its the 2lb supercharger spring.

 

[Toy Cobra]

it does...I ended up using a spectre filter.

It is the MAK hurricane pipe and filter. It is for sale if anyone is interested.

 

[Bmaughan]

The bypass proflow its only good for up to 700hp max per procharger specs.
Youll need a bigger one to get more out of it like the race bypass

FWIW- I recently spoke with Tyler at procharger about the proflo BOV and he said it will typically support 12lbs.

 

[Toy Cobra]

They

FWIW- I recently spoke with Tyler at procharger about the proflo BOV and he said it will typically support 12lbs.

They work okay for a low boost application but you might as well get a bigger valve up front and be done with it. No need to spend your money twice..

 

[Toy Cobra]

They

FWIW- I recently spoke with Tyler at procharger about the proflo BOV and he said it will typically support 12lbs.

They work okay for a low boost application but you might as well get a bigger valve up front and be done with it. No need to spend your money twice..

 

[sloride]

I j stalled a TiAl q50 in the exact same location as the factory bov pipe with great results. Score and after picture for comparison.

About install a turbosmart in that same location. Did you need to do any trimming when reinstalling the front clip?

 

[Toy Cobra]

About install a turbosmart in that same location. Did you need to do any trimming when reinstalling the front clip?

Non at all. It just replaced the nipple where the stock profile valve went.

 

[Ghosted_10spd]

Have you pulleyed down and put it on the dyno again?

 

[acere23]

Have you pulleyed down and put it on the dyno again?

Hey man. totally forgot about this post. LOL. I did pulley down to a 3.55 and now have a 3pump full return style fuel system on E85.
It made 831/645. not bad for this little blower

 

[SolarFlare]

Spicy. Nice

 

[acere23]

Spicy. Nice

thanks man

 

[Andy13186]

thanks man

You do any 60-130's on this setup? graph looks great

Sponsored