GT350 wheel stud replacement w/ARP wheel studs

[VoodooStang]

GT350 wheel stud replacement

Sponsored

 

[Tank]

Guess I have to add a hydraulic press to my garage....
Thanks for posting all this stuff [MENTION=30521]VoodooStang[/MENTION]

 

[cking]

harbor freight 25% today only

 

[VoodooStang]

ARP wheel studs w/Dorman lug nuts

 

[firestarter2]

Guess I have to add a hydraulic press to my garage....
Thanks for posting all this stuff [MENTION=30521]VoodooStang[/MENTION]

Big ass hammer works

 

[VoodooStang]

ARP wheel stud install

There is no possible way to install wheel studs without removing the hub.

 

[VoodooStang]

Lisle 22800 wheel stud installer tool

Lisle 22800 WHEEL STUD INSTALL tool
Easily Installs New Wheel Studs. Keeps the wheel stud square as it pulls it in place.Use with a ratchet or impact wrench to pull the new stud securely in place. Position the tool over the stud shaft. Tighten the lug nut against the tool to pull the stud in place.

 

[Epiphany]

No caliper stud install?

 

[VoodooStang]

Vorshlag caster/camber plates with Ford Performance M-5300-W springs.

Notice the Vorshlag caster camber plates and Ford Performance M-5300-W springs

 

[spiller]

Question: should the lug nut used to pull the stud though be considered sacrificial?

 

[DocWalt]

I'd lube the crap out of said lug nut then clean the studs.

 

[cking]

yes throw it away

 

[stanglife]

I've used that method before but was left wondering how much stress is actually put on the new stud. The plating ended up looking a little distressed in the area where I used the nut. I've since only used a press. Have a press has paid off enough times to make it worth the investment - it was cheapish.

 

[VoodooStang]

Rear wheel stud replacement

Pull the rear knuckle to change the wheel studs

 

[VoodooStang]

Hydraulic press to remove wheel studs

Sponsored