What's your ride height?

[AZ_Ryan]

I'm taking my measurements from the ground to the fender arc (the plastic). The tire is close to the fender but you have to remember when the suspension compresses the tires cambers in so no rub happens.

Ah there you go. Measure to the fender lip not the plastic. It still shouldn't make up an inch though.

Also, do you have cup 2's or PS4s?

Sponsored

 

[agmattocks]

Ah there you go. Measure to the fender lip not the plastic. It still shouldn't make up an inch though.

Also, do you have cup 2's or PS4s?

yeah from there it's 26 1/4" and i have Cup 2's on it at the moment.

 

[Palacios289]

26.5 front

27.25 rear.

-2.5 front camber. 19x11 SVE PP2 wheels 305/30 front 325/30 rear.

2022 HP lowered on steeda dual rates.

measured to the fender lip ABOVE the plastic HP fender flare.

 

[AZ_Ryan]

26.5 front

27.25 rear.

-2.5 front camber. 19x11 SVE PP2 wheels 305/30 front 325/30 rear.

2022 HP lowered on steeda dual rates.

measured to the fender lip ABOVE the plastic HP fender flare.

Thanks for sharing. Love the backdrop.

 

[Dan2023]

non-handling package Mach 1

handling package springs
FP camber plates front, set at 1.5 neg
Handling package rear stabilizer bar
Handling package original tires and rims

27.7front
28.10 rear

I’m good with it but some others disagree

 

[AZ_Ryan]

non-handling package Mach 1

handling package springs
FP camber plates front, set at 1.5 neg
Handling package rear stabilizer bar
Handling package original tires and rims

27.7front
28.10 rear

I’m good with it but some others disagree

Your car seems to be much higher than others with the HP setup. I wonder why that is.

 

[Dan2023]

Your car seems to be much higher than others with the HP setup. I wonder why that is.

I’ve been wondering the same myself, I’ve been told that it’s possible that the control arms might’ve been torqued and set while the vehicle was in the air rather than on the ground,

Sponsored