Velossa Tech Design - BIG MOUTH development

[zanGTA]

I bought both. Afe pro dry s and air ram. And x-pipe. Next step is understand how I can optimize with a tune.

Sponsored

 

[Jpjr21]

Does anyone have any pictures of it on a ruby red?

 

[MikeyPee]

Sorry if this was covered in the first 17 pages, but is this duct worth $100 over simply dremeling holes in the honeycomb?

 

[Gibbo205]

Sorry if this was covered in the first 17 pages, but is this duct worth $100 over simply dremeling holes in the honeycomb?

You should do both, the duct ensures all the airflow from the honey comb enters the air box and as such at high speeds you will get a ram air effect which can be good for upto 10BHP and improved throttle response.

I did this on my car and the car has better throttle response, IAT's stay within 5c of outside ambient temp and going WOT at 70mph the car just accelerates instantly and pulls so hard.

 

[Killswitch16GT]

Got some custom fender coyote head emblem from velossa tech and I love how it came together. Who's interested in some. Velossa tech can make it in different colors of course.

I want this now!!!

 

[FusionGT]

Been a few months but is that group buy still on? I'd like a red one.

 

[GTP]

Me too. (flared intake)

 

[VTECSAUCE]

How did I miss this thread? Anyone have a DIB with red or yellow ram air mouth?

 

[Killswitch16GT]

I want to buy the badges how can I get them?

 

[mustang_guy]

Im fairly interested in using one of these until i go twin turbo. Hmm

 

[Centurion07]

I made a DIY grill (http://www.mustang6g.com/forums/showthread.php?t=38689&page=18) which is now approx. 1" shallower than the stock item; is the BIG MOUTH capable of dealing with this i.e. can I just insert it 1" less and maybe glue in place rather than relying on the grill to hold it in place?

 

[mustang_guy]

Bump for answers on grill question. Ill be using the dusold grills. Its still a factory grill with the plastic honeycomb cut out and wiremesh attached.

 

[Rhinogt]

If my memory serves me correctly, when I installed mine there was excess going around the grille opening as well as into the rubber for the airbox. You should be ok I would think. If not, you could just glue in into place as you mentioned.

 

[VelossaTech]

It should be ok with that grill since you are using the stock rib as a template. The intake floats in between the grill and the stock inlet port. It can move axially, not a whole lot but there is some extra room if you need to create a gap.

 

[mustang_guy]

Good deal. Going to be ordering a black one shortly.

Sponsored