Torque booster question

[Stevenjasmin]

Thanks to Terry at BCR. I have my torque booster. Could someone tell me what color spring will run this Tial wastegate at around 10-11.5 lbs? Should I retune for the wastegate or am I good to go?

Thanks guys.

Sponsored

 

[slowpony]

Quick google search you'll find the spring chart. I wouldn't ask us about retune I would ask your tuner. For what it's worth my tuner told me to do a log on the tune I already have and send it to him to see if it needs adjusting

 

[Jay-rod427]

Tune will definitely need adjusting as you'll be getting more boost/air at the lower rpms.

 

[beefcake]

you should be setup with the 11.5 spring already on the 15.

11-14 we do the 10 psi spring

this is assuming your on 93

 

[thatonenozz]

Terry why do you set the 15's up for higher boost?

 

[arieso94z28]

you should be setup with the 11.5 spring already on the 15.

11-14 we do the 10 psi spring

this is assuming your on 93

Terry,

You guys have a setup coming out soon for us Procharger guys yet?

 

[venumous]

Terry why do you set the 15's up for higher boost?

Stronger internals.

 

[beefcake]

Terry why do you set the 15's up for higher boost?

the internals are stronger, so we feel a little more confident in an extra pound or so

Terry,

You guys have a setup coming out soon for us Procharger guys yet?

it wouldn't be that hard, the problem is....

you have more variables with the procharger piping, stage 1 and 2 and we just don't have as many in house, as the paxton cars.

 

[isedawishy]

I didn't know these were avail yet!
[MENTION=10926]beefcake[/MENTION] message on the way

 

[Pincushin3819]

you should be setup with the 11.5 spring already on the 15.

11-14 we do the 10 psi spring

this is assuming your on 93

What would be the best pulley size & wastegate spring for 93 on a 15 w/stock internals? & if switching to e85 how would this change the set up as far as pulley size and wastegate spring?

 

[christian]

Cant wait to see how these are performing. Hopefully ordering mine next wee on payday!

 

[zaquhree]

11.6 was my favorite spring for pump 93 and then 13.1psi for e85

 

[isedawishy]

Did you dyno with the 13.1 in?

 

[Pincushin3819]

11.6 was my favorite spring for pump 93 and then 13.1psi for e85

What pulleys did you use for both & what kinda of power did it make?

 

[beefcake]

on a 6rib, a 3.33 is what we recommend, 8 rib you can do 3.15

Sponsored