My Diff Cooler Build

[John S]

With the cooler mounted higher than the differential and no check valves in the system (I aware of,) I'm pretty sure oil drains back to the differential if it's not circulating through the cooler. I'll eventually sort this out, I mainly just want to know if the pump is actually functioning. The dealer procedure uses their high end scanner to activate the computer, similar to Forscan.

Sponsored

 

[GTP]

You can measure how much comes out. Diff holds about 1.5qt and the cooler maybe another quart.

 

[RobZ71LM7]

Thanks, Phil, I don't understand what information is actually being processed to trigger the oil pump relay but maybe jumper wiring the relay (#90 for factory equipped pumps) is the direct hack if you don't have Forscan to activate the pump?

If you find a way let me know. I've changed mine probably 3-4 times now and simply fill the diff until it's slightly overflowing and put the plug in quickly I've not seen any issues with oil level doing this after checking the car after a couple heat cycles. Since your jumper didn't have a resistor I wonder what temp it thinks correlates to zero ohms.

 

[GTP]

... Since your jumper didn't have a resistor I wonder what temp it thinks correlates to zero ohms.

That was my thought also.

Sponsored