Sponsored

Modifying As-Built Data Guide

OP
OP
AngelDeath

AngelDeath

Well-Known Member
Joined
May 5, 2016
Threads
50
Messages
1,415
Reaction score
1,081
Location
CH, New Jersey
First Name
Mike
Vehicle(s)
'20 Shelby GT500 Rapid Red / '01 Metallic Red C5 / '17 White Overland
Okay check the strip same possibility. The hyperflash indicates the circuit is incomplete. Usually it's the bulb or in this case the led.
You are correct, which is why I mentioned to see if the left side can be plugged into the right side (or vice versa, the right to the left) and see if the same issue occurs, if it does then it would answer the pending question.
Sponsored

 

dirtwarrior

Well-Known Member
Joined
Mar 22, 2021
Threads
193
Messages
925
Reaction score
277
Location
kentucky
First Name
Joe
Vehicle(s)
2015 3.7 mustang
I will try to switch sides with tail lights. It will be a nice day today for it
 

dirtwarrior

Well-Known Member
Joined
Mar 22, 2021
Threads
193
Messages
925
Reaction score
277
Location
kentucky
First Name
Joe
Vehicle(s)
2015 3.7 mustang
My trim tool some how grew legs and walked off. Ordered a new one
 

dirtwarrior

Well-Known Member
Joined
Mar 22, 2021
Threads
193
Messages
925
Reaction score
277
Location
kentucky
First Name
Joe
Vehicle(s)
2015 3.7 mustang
In front all is ok. It has been so windy, rainy and cold I have not switched sides on rear
 

Sponsored

dirtwarrior

Well-Known Member
Joined
Mar 22, 2021
Threads
193
Messages
925
Reaction score
277
Location
kentucky
First Name
Joe
Vehicle(s)
2015 3.7 mustang
You are correct, which is why I mentioned to see if the left side can be plugged into the right side (or vice versa, the right to the left) and see if the same issue occurs, if it does then it would answer the pending question.
I removed tail lights. Ford did not have a better idea this time. 1 tail light has a male plug and the other female it will not interchange. I checked the hazard and on the right side the outer tri bar will not light. Does this mean my tail light is shot?
 

TexasRebel

Gearshifter
Joined
Mar 19, 2016
Threads
27
Messages
2,500
Reaction score
835
Location
between the mustard and the mayo
Vehicle(s)
2016 YZ GTPP - PP2
I removed tail lights. Ford did not have a better idea this time. 1 tail light has a male plug and the other female it will not interchange. I checked the hazard and on the right side the outer tri bar will not light. Does this mean my tail light is shot?
If you resign yourself to buying a new tail led assembly, see if you can get access to the board. It might be as simple as a burned out resistor or a broken trace.
 

dirtwarrior

Well-Known Member
Joined
Mar 22, 2021
Threads
193
Messages
925
Reaction score
277
Location
kentucky
First Name
Joe
Vehicle(s)
2015 3.7 mustang
Do you know how to get to the board and test it
 
OP
OP
AngelDeath

AngelDeath

Well-Known Member
Joined
May 5, 2016
Threads
50
Messages
1,415
Reaction score
1,081
Location
CH, New Jersey
First Name
Mike
Vehicle(s)
'20 Shelby GT500 Rapid Red / '01 Metallic Red C5 / '17 White Overland
I removed tail lights. Ford did not have a better idea this time. 1 tail light has a male plug and the other female it will not interchange. I checked the hazard and on the right side the outer tri bar will not light. Does this mean my tail light is shot?
This looks like the tail light is the issue it seems, and without cracking it open there is no way to access the board. Looks like you more than likely need a replacement. I dont know if the dealership could test the unit, but I have a feeling your going to be back at the same point.
 

dirtwarrior

Well-Known Member
Joined
Mar 22, 2021
Threads
193
Messages
925
Reaction score
277
Location
kentucky
First Name
Joe
Vehicle(s)
2015 3.7 mustang
This looks like the tail light is the issue it seems, and without cracking it open there is no way to access the board. Looks like you more than likely need a replacement. I dont know if the dealership could test the unit, but I have a feeling your going to be back at the same point.
I like the white one. I guess I will get them when I can find the best price. Thanks for your reply
 

Sponsored

dirtwarrior

Well-Known Member
Joined
Mar 22, 2021
Threads
193
Messages
925
Reaction score
277
Location
kentucky
First Name
Joe
Vehicle(s)
2015 3.7 mustang
At this point I am not in a hurry to get them, I can wait for a price drop
 
OP
OP
AngelDeath

AngelDeath

Well-Known Member
Joined
May 5, 2016
Threads
50
Messages
1,415
Reaction score
1,081
Location
CH, New Jersey
First Name
Mike
Vehicle(s)
'20 Shelby GT500 Rapid Red / '01 Metallic Red C5 / '17 White Overland
At this point I am not in a hurry to get them, I can wait for a price drop
I would contact either your dealership or ford directly, maybe they can do something about it, If you have a '15 mustang, I know its 7.5yrs but still.
 

dirtwarrior

Well-Known Member
Joined
Mar 22, 2021
Threads
193
Messages
925
Reaction score
277
Location
kentucky
First Name
Joe
Vehicle(s)
2015 3.7 mustang
I would contact either your dealership or ford directly, maybe they can do something about it, If you have a '15 mustang, I know its 7.5yrs but still.
It may still have a warranty good idea
 

dirtwarrior

Well-Known Member
Joined
Mar 22, 2021
Threads
193
Messages
925
Reaction score
277
Location
kentucky
First Name
Joe
Vehicle(s)
2015 3.7 mustang
I checked the brake lights too. The same one will not light up with brakes and hazard but does with tail lights
 
OP
OP
AngelDeath

AngelDeath

Well-Known Member
Joined
May 5, 2016
Threads
50
Messages
1,415
Reaction score
1,081
Location
CH, New Jersey
First Name
Mike
Vehicle(s)
'20 Shelby GT500 Rapid Red / '01 Metallic Red C5 / '17 White Overland
I checked the brake lights too. The same one will not light up with brakes and hazard but does with tail lights
Because there are two set of led lights on the boards, night lights and brake/hazzard lights.
Sponsored

 
 




Top