Modifying As-Built Data Guide

[Matthewstorm]

I don't see any such option. Below is all I see:

You may have entered your VIN in the wrong box.

Sponsored

 

[codereddew]

I don't see any such option. Below is all I see:

Interesting...mine is located here:

Not exactly sure why nothing pops up for you

 

[codereddew]

Which number would it be?

Try this one:

 

[Matthewstorm]

Mine is in same place.

 

[Matthewstorm]

Try this one:

THANK YOU!!! Greatly appreciated. I will report back.

 

[HoosierDaddy]

Interesting...mine is located here:

Not exactly sure why nothing pops up for you

Mystery solved. I found the URL for the PTI info page in a search and it contained the VIN, so I plugged my VIN in and got a page explaining why:

PTI Information

This vehicle was built before 20th May 2018, PTI Info available for vehicle build on or after 20th May 2018

 

[Matthewstorm]

Mystery solved. I found the URL for the PTI info page in a search and it contained the VIN, so I plugged my VIN in and got a page explaining why:

PTI Information

This vehicle was built before 20th May 2018, PTI Info available for vehicle build on or after 20th May 2018

Well, that sux.

 

[HoosierDaddy]

Well, that sux.

No problem. I know where I can get a fake ID. Don't see why he couldn't make one for a car.

 

[Kidd]

2020 Mustang GT premium, PP1, mt82. Wondering If there is a “no lift shift” option that can be activated in through forscan in these cars? I know is was talked about when they came out and now it’s standard on the Mach 1s so I’m hoping it’s buried in the files somewhere on the GTs and can be turned on.

 

[Michael_vroomvroom]

2020 Mustang GT premium, PP1, mt82. Wondering If there is a “no lift shift” option that can be activated in through forscan in these cars? I know is was talked about when they came out and now it’s standard on the Mach 1s so I’m hoping it’s buried in the files somewhere on the GTs and can be turned on.

Unfortunately not. Member Sivi70980 has tested (https://www.mustang6g.com/forums/threads/flat-shifting-is-pretty-slick.157327/post-3216502) and it seems to not be available for us.

I've seen some mention of it in the tune from Ford Performance for 2018+ models, but not seen it confirmed.

 

[Kidd]

Unfortunately not. Member Sivi70980 has tested (https://www.mustang6g.com/forums/threads/flat-shifting-is-pretty-slick.157327/post-3216502) and it seems to not be available for us.

I've seen some mention of it in the tune from Ford Performance for 2018+ models, but not seen it confirmed.

I thought so since I hadn’t read of it but figured I’d ask. Thanks for the reply

 

[neodark]

Anyone with a digital dash, manual & magneride? Looking for IPC address 720-06-01 I did the digital cluster swap and cannot get the performance shift light & magneride indicator at the same time. (If I enable one, I lose the other as they share the same address value)

720-06-01 E = MagneRide D= Shift Indicator Enabled C = Disabled.

Per this video, the manual bullit has it, but I would love to see this address value to compare.

 

[WD Pro]

Anyone with a digital dash, manual & magneride? Looking for IPC address 720-06-01 I did the digital cluster swap and cannot get the performance shift light & magneride indicator at the same time. (If I enable one, I lose the other as they share the same address value)

720-06-01 E = MagneRide D= Shift Indicator Enabled C = Disabled.

Per this video, the manual bullit has it, but I would love to see this address value to compare.

What are you referring too with ‘Magneride indicator’ ?

Cheers,

WD

 

[HoosierDaddy]

Anyone with a digital dash, manual & magneride? Looking for IPC address 720-06-01 I did the digital cluster swap and cannot get the performance shift light & magneride indicator at the same time. (If I enable one, I lose the other as they share the same address value)

720-06-01 E = MagneRide D= Shift Indicator Enabled C = Disabled.

Per this video, the manual bullit has it, but I would love to see this address value to compare.

FWIW Those values would be consistent with the final 2 bits each being an on/off for one of those features. F would turn both on.

 

[neodark]

FWIW Those values would be consistent with the final 2 bits each being an on/off for one of those features. F would turn both on.

Awesome, I'll give that a shot and report back.

What are you referring too with ‘Magneride indicator’ ?

Cheers,

WD

If you look at the video right around 2:46 you can see the indicator on the bottom left, under the LC icon. Shows the suspension mode, in this case "Normal".

Sponsored