MGW Shifter Install

[Epiphany]

He has the design in mind but has yet to start cutting anything. Gonna be a bit. I'll be with him in July and if there is anything I can share regarding progress, I will.

Be aware, his intent is to design for the Mach 1 with the hope that it will play nicely on the GT350. So he'll have to test on both.

Sponsored

 

[knighthawk]

He has the design in mind but has yet to start cutting anything. Gonna be a bit. I'll be with him in July and if there is anything I can share regarding progress, I will.

Be aware, his intent is to design for the Mach 1 with the hope that it will play nicely on the GT350. So he'll have to test on both.

Any updates for us? I'm anxiously waiting to be able to order an MGW for my car and I can't find any of the previous generation anywhere and then I remembered you had close ties with George on these things.

 

[Epiphany]

We talked about this a few days ago. I can only say that there is a plan in terms of design. They are extremely busy and backlogged quite a bit which doesn't free up machine time or personnel. I'll be headed back down in the fall and I think you'll see physical progress around that time.

 

[Epiphany]

The chips are flying. I can say no more so stay the course as it may be a bit but something fantastic is coming.

 

[DrumReaper]

The chips are flying. I can say no more so stay the course as it may be a bit but something fantastic is coming.

The agony of the wait

 

[Epiphany]

Just a quick note. I'm itching to get on a plane and get out of NY and hope to time my escape with parts and pieces of this new design coming back from the anodizer. I don't know if it'll be end of November or before/after that but I'll be camera in hand and documenting everything I'm allowed to. I like very much what I have seen so far. Hang tight.

 

[DrumReaper]

Just a quick note. I'm itching to get on a plane and get out of NY and hope to time my escape with parts and pieces of this new design coming back from the anodizer. I don't know if it'll be end of November or before/after that but I'll be camera in hand and documenting everything I'm allowed to. I like very much what I have seen so far. Hang tight.

Let me know when… road trip. I’ll submit my R for the first 350 install.

 

[Epiphany]

I did talk to George about this and I believe he has somebody very near his shop for verifying GT350 fitment and he has his own Mach1 to ensure the same on that one. But I do like the idea of devouring more seafood. Sadly, I think the place we all went to eat down the road from George's manufacturing facility has shut down (fire?). Steak instead?

 

[DrumReaper]

I did talk to George about this and I believe he has somebody very near his shop for verifying GT350 fitment and he has his own Mach1 to ensure the same on that one. But I do like the idea of devouring more seafood. Sadly, I think the place we all went to eat down the road from George's manufacturing facility has shut down (fire?). Steak instead?

Oh there’s plenty good eats in Augusta… just say the word.

I still want a shifter tho.

 

[Brjb350sn]

Just a quick note. I'm itching to get on a plane and get out of NY and hope to time my escape with parts and pieces of this new design coming back from the anodizer. I don't know if it'll be end of November or before/after that but I'll be camera in hand and documenting everything I'm allowed to. I like very much what I have seen so far. Hang tight.

any updates on the new shifter?

 

[Egparson202]

any updates on the new shifter?

+1

 

[Brjb350sn]

https://www.mustang6g.com/forums/threads/mgw-short-shifter.168482/

found my own answer. Check link.

 

[Epiphany]

any updates on the new shifter?

I know testing has gone well with a 2021 Mach1 but I'll have to check in with George regarding a test unit on a GT350. I'll ask and see what I can share.

 

[Brjb350sn]

I know testing has gone well with a 2021 Mach1 but I'll have to check in with George regarding a test unit on a GT350. I'll ask and see what I can share.

Thanks. Appreciate any updates you can share.

 

[TrackMustang]

Nice job. Just a question... it looks like your Jack stands are and different heights, placing the car at an angle. Did you put any blocks behind the rear tires? Looks sketchy from here.

I was so scared looking at it

Sponsored