Rod Schneider
Well-Known Member
- Joined
- Oct 17, 2016
- Threads
- 12
- Messages
- 219
- Reaction score
- 173
- Location
- Ball Ground, GA
- First Name
- Rod
- Vehicle(s)
- 2016 Mustang EcoBoost
- Thread starter
- #1
I've been trying to update to Version 3 now that it's been released. I've followed the instructions on the Ford website, but when I plug in the USB stick, I get a "Software Update in Progress" message for several minutes, followed by an "update failed" message with the error code MEM_ERR03. I've tried several attempts, with and without doing a Master Reset, and trying both USB ports.
'16 Mustang PP, non-nav
64GB Sandisk Thumb Drive formatted to EXFAT
Files downloaded from Ford on a Mac, expanded the .zip file with "Stuffit Expander" per the Ford instructions, and transferred to the thumbdrive per the Ford instructions.
(I'd previously updated from version 1.0 to 2.2 last summer with no problem using the same equipment)
Any ideas before I call the 800 number?? Thanks.
'16 Mustang PP, non-nav
64GB Sandisk Thumb Drive formatted to EXFAT
Files downloaded from Ford on a Mac, expanded the .zip file with "Stuffit Expander" per the Ford instructions, and transferred to the thumbdrive per the Ford instructions.
(I'd previously updated from version 1.0 to 2.2 last summer with no problem using the same equipment)
Any ideas before I call the 800 number?? Thanks.
Sponsored