socalsnake
Well-Known Member
Thanks...will do the same when it gets here.I zip-tied mine in two places: I secured the module to a wire bundle under the dash, and the connectors to the throttle assembly wire.
Sponsored
Thanks...will do the same when it gets here.I zip-tied mine in two places: I secured the module to a wire bundle under the dash, and the connectors to the throttle assembly wire.
I did the same. Not many options down there.Room yes, but there isn't a lot of options. I have mines ziptied to some harness to the right of the accelerator pedal but i'm not sure if i like it there. Not sure where else to zip tie it.
Yes you unplug the batteryIs it necessary to unplug the battery to install this?
Somewhere in this thread, a member recommended moving the driver's seat all the way back before unplugging the battery.
I've read the install instructions for the PedalMAX online, but it doesn't seem like its necessary to unplug the battery before installation.
Ok...will do!Yes you unplug the battery
He said he unplugged the battery before he moved the seat back. He was just giving a heads up..
Sometimes its better to be safe then sorry..I would unplug just to be safe of blowing a fuse or messing something up..
0=stock 100= maximum sensitivityThis forum is giving me way too many things to spend my money on! Sigh... order placed
So on the little knob, 0 is stock feel, and 100 is... holy shit?
Haha, I know! I feel the same way...This forum is giving me way too many things to spend my money on! Sigh...
It comes with a wire you can connect to the box that dials it down to 60%.Without the knob it's always at 100% right?