Intercooler question

[TeeLew]

If not very mechanically inclined, it would best to let an experienced shop do it.

BD

Best would be to learn.

Sponsored

 

[ihasnostang]

if you have someone to help you hold the bumper while you disconnect things it's not too bad. i thought the hardest part was getting the oem charge pipes onto the intercooler (snouts?)

 

[Buldawg76]

Best would be to learn.

Agreed but if you don't have all the tools needed and some mechanical inclination then you can mess up things quickly also.

BD

 

[S1lv3rbull3t]

I have the ETS full race intercooler and my charge Temps stay 8-10 degrees above ambient even when doing back to back pulls. I'm FBO 93 tune and I'm door to door with Scatpacks.

 

[Dave TBG]

I got lucky and got hit head on so it only cost me a few bucks to have the body shop install it while the front end was apart.
I've gotta ask, why the Roush intake? It seems like a waste of time and money, no?

 

[stannypack]

I got lucky and got hit head on so it only cost me a few bucks to have the body shop install it while the front end was apart.
I've gotta ask, why the Roush intake? It seems like a waste of time and money, no?

1. way louder suctioning sound
2. looks sexy in the engine bay

edit: also my friend and I were able to install the cvf street in a couple hours, can confirm hardest part was just struggling with the charge pipes

 

[Justgonna send it]

@Dark Side Pmed you

Sponsored