Looks like a covercraftWhat sunshade is that?
If you have the standard auto dimming miror, two pins on the connector at the rear of the mirror I can't remember which, but there's a post or two on here - if you have the frame less mirror with the plastic cover on the windshield, covering all the cameras and sensors for lane keeping and what not, it is also pretty easy - connector on the RH side, has four or five pins, only three are active, it's the bottom pin for hot, skip one, middle is ground. Mirror tap, or you can make your own out of a standard RJ11 phone connector.Where do you tie the power into? Been thinking about this.