First Oil Change Done

[Soulja4187]

My local dealer charges $55 for blend and $120 for full synthetic.

Sponsored

 

[oregongt350]

Another great reason to do it yourself.

Another great reason to do it yourself.

Concur

 

[JCDriller]

I wish the GT500 used a standard oil plug like the GTs, I really like the UPR plug.

 

[Melmark93]

I wish the GT500 used a standard oil plug like the GTs, I really like the UPR plug.

Have you seen the Fumoto F107SX drain valve? It's been about a year since anyone on this board mentioned them. I installed one last week with my first oil change.

 

[fishpick]

Have you seen the Fumoto F107SX drain valve? It's been about a year since anyone on this board mentioned them. I installed one last week with my first oil change.

Interesting.
pictures or it didn’t happen

 

[JCDriller]

Have you seen the Fumoto F107SX drain valve? It's been about a year since anyone on this board mentioned them. I installed one last week with my first oil change.

That's the route I'll go, I have one on my Jeep wrangler and my 4R, both have been flawless.

I actually have a nice UPR valve on my workbench that I was going to install with my first oil change, obviously that didn't work. O'well I'll find a young kid a the next cars and coffee and make his day with a free gift.

 

[kilobravo]

pictures or it didn’t happen

Fish: This is what one looks like. I put this on mine shortly after delivery based on a solid recommendation from a knowledgeable member up the road from me. (Don)

It will sit even with the bottom plate and SHOULDN'T be an issue but I'll admit, it worried me at first.

 

[fishpick]

Fish: This is what one looks like. I put this on mine shortly after delivery based on a solid recommendation from a knowledgeable member up the road from me. (Don)

It will sit even with the bottom plate and SHOULDN'T be an issue but I'll admit, it worried me at first.

I gotta see it on. Worried is an understatement.

 

[Melmark93]

This is as far as my arm can reach with the car flat on the floor.

 

[HiTekExec]

This is as far as my arm can reach with the car flat on the floor.

SHOULD be ok, but it would still have me concerned. I wish there was an appropriate version similar to the Ronin that I used on my 2019 GT. Some industrious entrepreneur with a machine shop should crack some out...

Sponsored