First mods to your Mach 1

[Grey-Smoke]

I won’t say they are mods but just a couple improvements.

1st I did window tint 15% on sides and back.
2nd new valve stem caps with mustangs
3rd window tinted license plate cover
4th trunk net
5th Ford performance oil-air separator

Sponsored

 

[hbash]

I won’t say they are mods but just a couple improvements.

1st I did window tint 15% on sides and back.
2nd new valve stem caps with mustangs
3rd window tinted license plate cover
4th trunk net
5th Ford performance oil-air separator

Do you have links for your oil air separator and trunk net?

 

[0wen]

Hmm I have the original PP2 wheels, not sure I’d say they are dark gray, more medium gray. Would personally prefer black if they were on a silver car but I think they look good on other color cars, especially black. They look darker in shade and lighter in light...

I'm with you and Charlemagne - I was going for a more OEM+ look overall, so would prefer Ford wheels to aftermarket even though the selection is very limited.

Those PP2 wheels look great on your car, and suit it far better than black would, definitely the right choice!

A question if you don't mind - is there any poke at either the front or rear?
It doesn't look like it from the photo but here in the UK we're not allowed to have any of the tyre stick out from the arch...

-0.

 

[Grey-Smoke]

Do you have links for your oil air separator and trunk net?

I was going to order it through Ford but I found the same part on Amazon for 159$ vs 200$ I just looked and they are sold out at the 159$ price. Just keep watching it might pop up again in a few days at the 159$ price.
2018-2021 Mustang GT Ford Performance M-6766-A50A RH Engine Oil Air Separator https://www.amazon.com/dp/B07HRXW4D...abc_SS7ER451XDY5FAS81BZD?_encoding=UTF8&psc=1

the net also from Amazon
Mustang Car Accessories,Envelope... https://www.amazon.com/dp/B08VNKHM5F?ref=ppx_pop_mob_ap_share

 

[Charlemagne]

Those PP2 wheels look great on your car, and suit it far better than black would, definitely the right choice!

I agree. That shade of gray would be perfect match for Mach 1, looks very close to the optional Y spoke wheels (which are magnetic painted).

A question if you don't mind - is there any poke at either the front or rear?
It doesn't look like it from the photo but here in the UK we're not allowed to have any of the tyre stick out from the arch...

Looks like that's what the wheel lip moldings at the front are for, then they're flush with it and not sticking out (beyond the lip). Rears look fine as-is too at the photos. We have same regulations too.

 

[Mikepol2]

I'm with you and Charlemagne - I was going for a more OEM+ look overall, so would prefer Ford wheels to aftermarket even though the selection is very limited.

Those PP2 wheels look great on your car, and suit it far better than black would, definitely the right choice!

A question if you don't mind - is there any poke at either the front or rear?
It doesn't look like it from the photo but here in the UK we're not allowed to have any of the tyre stick out from the arch...

-0.

The rears are nice and flush, the fronts poke a little. I may keep these and run them on the Mach 1 when it arrives, I think with the front wheel well moldings on the Mach it may line up with the poke:

 

[wilkinda65]

For those contemplating the spoiler change as discussed above here are the US prices quoted directly from Ford.
Wing - $1,518.08. Gurney Flap - $181.17
I’m still looking for the numbers and cost of the front splitter that mirrors the handling package.

My local Ford dealer quoted me $1001.94 for the rear spoiler un-painted. $151 for the Gurney Flap.

 

[wilkinda65]

I won’t say they are mods but just a couple improvements.

1st I did window tint 15% on sides and back.
2nd new valve stem caps with mustangs
3rd window tinted license plate cover
4th trunk net
5th Ford performance oil-air separator

Crazy how this color looks light blue at times and off white at others depending on lighting

 

[0wen]

The rears are nice and flush, the fronts poke a little. I may keep these and run them on the Mach 1 when it arrives, I think with the front wheel well moldings on the Mach it may line up with the poke:

Thank you!
That angle is really helpful.

It looks like mainly sidewall which (I think?!) is OK as it's the treaded area that needs to be under the bodywork. As my build date got knocked back I've got plenty of time to look into it...

Looking at Tshenberg's car on the other thread I think the HP wheels look fantastic on an Iconic Silver car (great choice btw), but these wheels would also look great and it's nice to have options!

-0.

 

[Mikepol2]

Thank you!
That angle is really helpful.

It looks like mainly sidewall which (I think?!) is OK as it's the treaded area that needs to be under the bodywork. As my build date got knocked back I've got plenty of time to look into it...

Looking at Tshenberg's car on the other thread I think the HP wheels look fantastic on an Iconic Silver car (great choice btw), but these wheels would also look great and it's nice to have options!

-0.

Good eye! Yes, the sidewall is past the fender, but it slopes inward so the edge of the tread lined up with the edge of the fender. Can’t wait till we can all start posting our own pics!

 

[Biggsy]

Do you have links for your oil air separator and trunk net?

https://parts.levittownfordparts.co...018-50l-coyote-oil-air-separator-rh-m6766a50a

This dealer is in NY. And free shipping

 

[Isitfast]

First mod is in. Installing Saturday

 

[Mikepol2]

First mod is in. Installing Saturday

I must say, having a hard time figuring out what people don't like about the stock active exhaust but that's what makes modding fun!

 

[Isitfast]

It’s a borla s type with active exhaust. I plan on forced induction so a 3 inch cat back is something I wanted. Also stock is too quiet

 

[hbash]

Some guy on youtube was showing this off. A bit morbid, no?

Sponsored