Direct injection re-installation kit?

[HKusp]

I am in the process of putting a built shortblock and ported heads together and re-installing it in my car. Is there a reinstall kit for those direct injectors? Or do I just reinstall them as is?

And here is some engine porn, for those so inclined.

Sponsored

 

[HKusp]

No one...???

 

[Proshop]

Jason I have never heard anybody say anything that had to be done for them other than the DI line from the DI pump is only a one time use application. So I would guess you would install them just like a standard injector.

 

[junits15]

Jason I have never heard anybody say anything that had to be done for them other than the DI line from the DI pump is only a one time use application. So I would guess you would install them just like a standard injector.

You need to put new seals on them.

DI seals are one time use by the book, but I've reused them before with success. On a high dollar build like this it would probably be wise to get new seals. You'll need 8 seals and an installer tool

I'll see if i can find a link

 

[junits15]

the part number for a Gen 3 is JX6Z-9229-A This includes the top o-rings, the teflon seals, spacers, and springs for 4 injectors.

You also need something like this to actually get the seals on the injectors: https://www.amazon.com/CTA-Tools-38...lpcontext&ref_=fplfs&psc=1&smid=ATVPDKIKX0DER

 

[Proshop]

You need to put new seals on them.

DI seals are one time use by the book, but I've reused them before with success. On a high dollar build like this it would probably be wise to get new seals. You'll need 8 seals and an installer tool

I'll see if i can find a link

Great information to share for the community sir!

 

[andrewtac]

I bought a blockoff kit for them on my build, running e85.

Sponsored