Differential bushing lockout kit.

[Tinpot]

Any GT500 owners fitted one of these kits ? Whose ? I have a Mach 1 ( hangs head in shame ) which apparently utilises the GT500 subframe and I’m assuming that includes the bushings. I can’t find anyone who makes a kit that possibly fits a GT500 apart from Whiteline and theirs is discontinued. Are these kits even necessary on the GT500 as I can’t find a lot of info on this. TIA.

Sponsored

 

[shogun32]

The bolt fix with sleeve shim at MINIMUM is needed for all Mustang incl. Eco.
The whiteline 'puck' version kit (KDT934) is actually available. The total-replacement one is not, even though it's the far superior solution.

 

[Tinpot]

The bolt fix with sleeve shim at MINIMUM is needed for all Mustang incl. Eco.
The whiteline 'puck' version kit is actually available. The total-replacement one is not, even though it's the far superior solution.

Excellent, thanks. FWIW I did email Whiteline about their full kit and they replied stating it was discontinued but didn’t mention the puck version kit. Do you have the part number ?

 

[shogun32]

see previous post. I just got 2 of them delivered yesterday.

 

[Tinpot]

Thanks !

 

[NJMike]

Did you try the BMR site?

 

[Tinpot]

Did you try the BMR site?

Yes. Again, I emailed them to check on compatibility of their BK051 kit mentioned in this GT500 build:
https://www.fordmuscle.com/tech-stories/2020-shelby-gt500-suspension-test/

and they said the kit does not fit

 

[WD Pro]

As there seems to be a lot of uncertainty, stick your head under the back and grab a photo of a rear bush.

If it looks like this (but with a flange head bolt in the middle - and note the spacing of the rubber tabs) :

Then it might be worth a trial fit of one of the standard Steeda inserts - just give us a shout if you think it’s worth giving one a try

WD

 

[Houston Kid]

Is this similar to Steeda stop the hop kit?

 

[shogun32]

Is this similar to Steeda stop the hop kit?

there are at least 3 tiers to Steeda's stop-the-hop. But you're looking for
https://www.steeda.com/steeda-s550-...t-system-urethane-2015-ecoboost-555-4443.html

beware they DO produce (rather obnoxious) noise at certain resonate frequencies. Only the Whiteline are near-silent.

 

[ice445]

The bolt fix with sleeve shim at MINIMUM is needed for all Mustang incl. Eco.
The whiteline 'puck' version kit (KDT934) is actually available. The total-replacement one is not, even though it's the far superior solution.

Where is it available? I've been trying to find it but it wasn't available for a while

 

[shogun32]

Where is it available? I've been trying to find it but it wasn't available for a while

I bought it off WhiteLine's website back when it was 30% off over Christmas. Places like Summit Racing should have no trouble sourcing either.

 

[ice445]

I bought it off WhiteLine's website back when it was 30% off over Christmas. Places like Summit Racing should have no trouble sourcing either.

Unfortunately it's out of stock everywhere still :(

 

[shogun32]

Unfortunately it's out of stock everywhere still :(

I have 2 of them, so could be persuaded to let one of them go.
Let the bidding war commence! /JK

 

[ice445]

I have 2 of them, so could be persuaded to let one of them go.
Let the bidding war commence! /JK

Lol let me know your price

Sponsored