- Joined
- Nov 2, 2015
- Threads
- 107
- Messages
- 5,822
- Reaction score
- 2,395
- Location
- SE Michigan
- First Name
- Scott
- Vehicle(s)
- Carroll Shelbys Soul Lives Under My GT350 Hood
- Thread starter
- Banned
- #1
Let's hear it!
I've been running the idea through my head of a 700+ crank hp 5.2L flatplane Voodoo Naturally Aspirated engine. It "could" be done!
Let's hear what you think and your ideas. But it's got to be naturally aspirated only. I know were limited on parts (cams, intakes, etc) so custom pieces will be needed. No doubt the crank and block will survive, as will the heads.
I would knife edge the crank.
Titanium rods.
Forged Pistons.
Rework the heads.
Custom intake / induction and fuel system.
Raise the compression.
Custom cams.
2" headers.
9000+ RPM!
I've been running the idea through my head of a 700+ crank hp 5.2L flatplane Voodoo Naturally Aspirated engine. It "could" be done!
Let's hear what you think and your ideas. But it's got to be naturally aspirated only. I know were limited on parts (cams, intakes, etc) so custom pieces will be needed. No doubt the crank and block will survive, as will the heads.
I would knife edge the crank.
Titanium rods.
Forged Pistons.
Rework the heads.
Custom intake / induction and fuel system.
Raise the compression.
Custom cams.
2" headers.
9000+ RPM!
Sponsored