esacteksab
Well-Known Member
I'm curious how much boost you could push through a 3.700" bore. Wonder what the thickness is at that bore. Impression I get is that if you want a lot of boost, you stick with the stock bore.
Sponsored
So nothing you can say unless you put your money where your mouth is . LolIs there anything I can say to make you change your mind?
I really wanted you to build an exotic engine. Sad face.
I know the experts say less than the stock bore but I have had a couple of MMR sleeved 5.2 ās that have made 1100 whp on the dyno.I'm curious how much boost you could push through a 3.700" bore. Wonder what the thickness is at that bore. Impression I get is that if you want a lot of boost, you stick with the stock bore.
Nice .Nice OP.
I have a brand new FRPP gen 3 5.0 coyote bare block delivering next week.
Iām gonna pack it with Manley HD pistons and H Tuff rods.
Iāll be into it right around $3000 all in.
Cheapest is Summit on the FRPP Gen 3 block FMS-M6010-M504VC. $775 shipped to my door... will be here Wednesday with any luck. I got lucky and got it $75 off using one of Summits promo codes 2 weeks ago. Their standard price is $852 shipped to your door.Gen 3 blocks are also cheaper and can be had for less than $1000 shipped .
Retail is $835 but $990 when you add shipping and tax .
Cheapest is if you can get your local dealer to price match .
Thatās a great deal.Cheapest is Summit on the FRPP Gen 3 block FMS-M6010-M504VC. $775 shipped to my door... will be here Wednesday with any luck. I got lucky and got it $75 off using one of Summits promo codes 2 weeks ago. Their standard price is $852 shipped to your door.
It is bare, no crank... not sure on bearings but i would guess it does not include them. Although main caps/bolts are included so who knows... guess ill find out next week.
I will be assembling mine myself yes.
I sure will, but im guessing this block will not have the brace. My list does not include crank so add $325 for that.Thatās a great deal.
Please can you take a pic in the intake surface when it get it ?
I want it see if it has the same bracing as the new voodoo/predator block .
So is the $3K āall in ā just the pistons, rods and block or does that include the crank?
Right now I am also at $3200 for the voodoo block /pistons/rods(Manley H beams with ARP 2000 bolts )
Another $700 for crank, bearings and oil squirters plus $700 assembly .
Great news for you. How do they "clean up" a spray bore block? Im curious on that one.Well I got good news. Machinist called me this morning. Block _will_ clean up at .005". So gonna send it. Will have stock crank, Molnar Power Adder Rods and Diamond Mod2k pistons. I can tell you, it's definitely cheaper to use a Gen 3 block than what I have in machine work. Live in and learn. Definitely interested in what others come up with.