Elit3Sally
Silver State Mustangs
- Joined
- May 2, 2017
- Threads
- 2
- Messages
- 13
- Reaction score
- 5
- Location
- Las Vegas
- Website
- Www.instagram.com
- Vehicle(s)
- 2015 Mustang GT Supercharged
- Thread starter
- #1
***ISSUE SOLVED*** There is a SMALL round Toner Ring ( google has no pics nor does ford) It is a super small flat ring with 3 pegs that sits on the half shaft between the Hub bearing assembly. No documentation it, ford dealer could not even find the issue. After comparing the left to right side and looking at the FORscan DTC codes we found the driver side didn't have the ring. It broke off, so the issue was the computer reading the passenger side but not the driver causing a error.
Hello everyone. I have a 2015 Mustang GT with a Paxton 2200SL I recently blew out my Diff bearings etc so I picked up a full 3.31 housing and installed it. I re-programmed the BCM using FORscan. I changed Line 0726-12-01 to 014B 087B ( 3.31 gears and the Hex for my tire size).
I then forced the PCM to learn the new values of the BCM everything was accepted and the P160A error was removed meaning the PCM and BCM are now both seeing the valid information BUT as soon as i start driving my speedometer as a weird tick and it has caused my ABS, Traction Control, AdvancedTrac, Hill Assist Start etc all to flash. My dash is light up like a Christmas Tree..I have spent two weeks trying to figure it out:frusty::frusty:
I have heard from a few people to buy the Whipple Flare Tool I REALLY don't wanna spend $275 for something I use one time, and does the same thing FORscan can do. can ANYONE help with this issue driving around in Las Vegas with no traction control and no ABS has already caused me issues really need a fix :(:(
Here is a Video AFTER i clear all the codes.
[ame]
Full DTC Code
===PCM DTC U0415:00-2F===
Code: U0415 - Invalid Data Received From ABS Control Module
Status:
- DTC Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Powertrain Control Module
===END PCM DTC U0415:00-2F===
===OBDII DTC None===
Successful DTC reading, no error codes found
Module: On Board Diagnostic II
===END OBDII DTC None===
===APIM DTC None===
Successful DTC reading, no error codes found
Module: Accessory Protocol Interface Module
===END APIM DTC None===
===PAM DTC U0401:00-2B===
Code: U0401 - Invalid Data Received From ECM/PCM
Status:
- DTC Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Parking Aid Module
===END PAM DTC U0401:00-2B===
===PAM DTC U0415:00-2B===
Code: U0415 - Invalid Data Received From ABS Control Module:frusty:
Status:
- DTC Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Parking Aid Module
===END PAM DTC U0415:00-2B===
===BdyCM DTC B124D:02-8A===
Code: B124D - Tire Pressure Sensor
Additional Fault Symptom:
- General Signal Failure
Status:
- DTC Present at Time of Request
- Malfunction Indicator Lamp is On for this DTC
Module: Body Control Module
===END BdyCM DTC B124D:02-8A===
===BCMB DTC B1265:24-0A===
Code: B1265 - Left Rear Turn Lamp Feedback
Additional Fault Symptom:
- Signal Stuck High
Status:
- DTC Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Body Control Module B
===END BCMB DTC B1265:24-0A===
===BCMB DTC B1266:24-0A===
Code: B1266 - Right Rear Turn Lamp Feedback
Additional Fault Symptom:
- Signal Stuck High
Status:
- DTC Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Body Control Module B
===END BCMB DTC B1266:24-0A===
===FCIM DTC None===
Successful DTC reading, no error codes found
Module: Front Controls Interface Module
===END FCIM DTC None===
===FCDIM DTC None===
Successful DTC reading, no error codes found
Module: Front Control/Display Interface Module
===END FCDIM DTC None===
===OCS DTC U0401:00-2B===
Code: U0401 - Invalid Data Received From ECM/PCM
Status:
- DTC Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Occupant Classification System Module
===END OCS DTC U0401:00-2B===
===ABS DTC C0036:07-AB===
Code: C0036 - Left Rear Tone Wheel
Additional Fault Symptom:
- Mechanical Failures
Status:
- DTC Present at Time of Request
- Malfunction Indicator Lamp is On for this DTC
Module: Antilock braking system
Freeze Frame :
-GLOBTIM: 92937406 sec - Global real time
-TOTDIST: 106279.0 km - Total Distance
-MAINECUV: 14.50 Volt - Main ECU voltage supply
-OUTTMP: 19 °C - External Temperature From Sensor
-POWER_MODE: Running - Power Mode Status
-ABS: Inactive - ABS
-AYC: Inactive - AYC
-BTCS: Inactive - BTCS -201D
-HDC: Inactive - HDC
-RSC: Inactive - RSC
-BTC: Inactive - BTC
-VAC_BST_ST: Inactive - Active Vacuum Booster State
-BST_REL_SW: Inactive - Booster Release Switch State
-HYD_PMP_ST: Inactive - Hydraulic Pump State
-VPWR_ABS: 14.50 Volt - Module supply voltage
-VSS: 15.0 km/h - Vehicle Speed
===END ABS DTC C0036:07-AB===
===RTM DTC U0401:00-2F===
Code: U0401 - Invalid Data Received From ECM/PCM
Status:
- DTC Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Radio Transceiver Module
===END RTM DTC U0401:00-2F===
===RCM DTC B00A0:68-8B===
Code: B00A0 - Occupant Classification System
Additional Fault Symptom:
- Event Information
Status:
- DTC Present at Time of Request
- Malfunction Indicator Lamp is On for this DTC
Module: Restraint Control Module
===END RCM DTC B00A0:68-8B===
===RCM DTC U0401:00-8B===
Code: U0401 - Invalid Data Received From ECM/PCM
Status:
- DTC Present at Time of Request
- Malfunction Indicator Lamp is On for this DTC
Module: Restraint Control Module
===END RCM DTC U0401:00-8B===
===PSCM DTC U0401:00-0B===
Code: U0401 - Invalid Data Received From ECM/PCM
Status:
- DTC Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Power Steering Control Module
Freeze Frame :
-STEER_FEEL: Normal - Steering Personalization Status
-STRWHL_POS_CAL: No - Steering Wheel Position Sensor Calibration
-SW_RAW: -17.60 ° - Steering Wheel Angle - Raw
-SW_ANGLE: 0.00 ° - Steering Wheel Angle
-SSHFT_TQ_S2: 2.5 Nm - Steering Shaft Torque Sensor #2
-SW_ALIGN_OFSET: 32.76 ° - Steering Wheel Angle Alignment Offset
-TOTDIST: 106279.0 km - Total Distance
-GLOBTIM: 154896 sec - Global real time
-MOD_SUP_V: 14.40 Volt - Module Supply Voltage
-PSCM_INT_TEMP: 21 °C - PSCM Internal Temperature
-EPAS_MOTOR_CUR: 8.60 Amper - EPAS Motor Current
-VSS: 14.0 km/h - Vehicle Speed
===END PSCM DTC U0401:00-0B===
===ACM DTC None===
Successful DTC reading, no error codes found
Module: Audio Control Module
===END ACM DTC None===
===SCCM DTC None===
Successful DTC reading, no error codes found
Module: Steering Column Control Module
===END SCCM DTC None===
===IPC DTC U0415:00-0A===
Code: U0415 - Invalid Data Received From ABS Control Module
Status:
- DTC Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Instrument Panel Control Module
===END IPC DTC U0415:00-0A===
===GWM DTC None===
Successful DTC reading, no error codes found
Module: Gateway Module A
===END GWM DTC None===
===GPSM DTC U0401:00-8A===
Code: U0401 - Invalid Data Received From ECM/PCM
Status:
- DTC Present at Time of Request
- Malfunction Indicator Lamp is On for this DTC
Module: Global Positioning System Module
===END GPSM DTC U0401:00-8A===
Hello everyone. I have a 2015 Mustang GT with a Paxton 2200SL I recently blew out my Diff bearings etc so I picked up a full 3.31 housing and installed it. I re-programmed the BCM using FORscan. I changed Line 0726-12-01 to 014B 087B ( 3.31 gears and the Hex for my tire size).
I then forced the PCM to learn the new values of the BCM everything was accepted and the P160A error was removed meaning the PCM and BCM are now both seeing the valid information BUT as soon as i start driving my speedometer as a weird tick and it has caused my ABS, Traction Control, AdvancedTrac, Hill Assist Start etc all to flash. My dash is light up like a Christmas Tree..I have spent two weeks trying to figure it out:frusty::frusty:
I have heard from a few people to buy the Whipple Flare Tool I REALLY don't wanna spend $275 for something I use one time, and does the same thing FORscan can do. can ANYONE help with this issue driving around in Las Vegas with no traction control and no ABS has already caused me issues really need a fix :(:(
Here is a Video AFTER i clear all the codes.
[ame]
Full DTC Code
===PCM DTC U0415:00-2F===
Code: U0415 - Invalid Data Received From ABS Control Module
Status:
- DTC Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Powertrain Control Module
===END PCM DTC U0415:00-2F===
===OBDII DTC None===
Successful DTC reading, no error codes found
Module: On Board Diagnostic II
===END OBDII DTC None===
===APIM DTC None===
Successful DTC reading, no error codes found
Module: Accessory Protocol Interface Module
===END APIM DTC None===
===PAM DTC U0401:00-2B===
Code: U0401 - Invalid Data Received From ECM/PCM
Status:
- DTC Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Parking Aid Module
===END PAM DTC U0401:00-2B===
===PAM DTC U0415:00-2B===
Code: U0415 - Invalid Data Received From ABS Control Module:frusty:
Status:
- DTC Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Parking Aid Module
===END PAM DTC U0415:00-2B===
===BdyCM DTC B124D:02-8A===
Code: B124D - Tire Pressure Sensor
Additional Fault Symptom:
- General Signal Failure
Status:
- DTC Present at Time of Request
- Malfunction Indicator Lamp is On for this DTC
Module: Body Control Module
===END BdyCM DTC B124D:02-8A===
===BCMB DTC B1265:24-0A===
Code: B1265 - Left Rear Turn Lamp Feedback
Additional Fault Symptom:
- Signal Stuck High
Status:
- DTC Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Body Control Module B
===END BCMB DTC B1265:24-0A===
===BCMB DTC B1266:24-0A===
Code: B1266 - Right Rear Turn Lamp Feedback
Additional Fault Symptom:
- Signal Stuck High
Status:
- DTC Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Body Control Module B
===END BCMB DTC B1266:24-0A===
===FCIM DTC None===
Successful DTC reading, no error codes found
Module: Front Controls Interface Module
===END FCIM DTC None===
===FCDIM DTC None===
Successful DTC reading, no error codes found
Module: Front Control/Display Interface Module
===END FCDIM DTC None===
===OCS DTC U0401:00-2B===
Code: U0401 - Invalid Data Received From ECM/PCM
Status:
- DTC Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Occupant Classification System Module
===END OCS DTC U0401:00-2B===
===ABS DTC C0036:07-AB===
Code: C0036 - Left Rear Tone Wheel
Additional Fault Symptom:
- Mechanical Failures
Status:
- DTC Present at Time of Request
- Malfunction Indicator Lamp is On for this DTC
Module: Antilock braking system
Freeze Frame :
-GLOBTIM: 92937406 sec - Global real time
-TOTDIST: 106279.0 km - Total Distance
-MAINECUV: 14.50 Volt - Main ECU voltage supply
-OUTTMP: 19 °C - External Temperature From Sensor
-POWER_MODE: Running - Power Mode Status
-ABS: Inactive - ABS
-AYC: Inactive - AYC
-BTCS: Inactive - BTCS -201D
-HDC: Inactive - HDC
-RSC: Inactive - RSC
-BTC: Inactive - BTC
-VAC_BST_ST: Inactive - Active Vacuum Booster State
-BST_REL_SW: Inactive - Booster Release Switch State
-HYD_PMP_ST: Inactive - Hydraulic Pump State
-VPWR_ABS: 14.50 Volt - Module supply voltage
-VSS: 15.0 km/h - Vehicle Speed
===END ABS DTC C0036:07-AB===
===RTM DTC U0401:00-2F===
Code: U0401 - Invalid Data Received From ECM/PCM
Status:
- DTC Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Radio Transceiver Module
===END RTM DTC U0401:00-2F===
===RCM DTC B00A0:68-8B===
Code: B00A0 - Occupant Classification System
Additional Fault Symptom:
- Event Information
Status:
- DTC Present at Time of Request
- Malfunction Indicator Lamp is On for this DTC
Module: Restraint Control Module
===END RCM DTC B00A0:68-8B===
===RCM DTC U0401:00-8B===
Code: U0401 - Invalid Data Received From ECM/PCM
Status:
- DTC Present at Time of Request
- Malfunction Indicator Lamp is On for this DTC
Module: Restraint Control Module
===END RCM DTC U0401:00-8B===
===PSCM DTC U0401:00-0B===
Code: U0401 - Invalid Data Received From ECM/PCM
Status:
- DTC Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Power Steering Control Module
Freeze Frame :
-STEER_FEEL: Normal - Steering Personalization Status
-STRWHL_POS_CAL: No - Steering Wheel Position Sensor Calibration
-SW_RAW: -17.60 ° - Steering Wheel Angle - Raw
-SW_ANGLE: 0.00 ° - Steering Wheel Angle
-SSHFT_TQ_S2: 2.5 Nm - Steering Shaft Torque Sensor #2
-SW_ALIGN_OFSET: 32.76 ° - Steering Wheel Angle Alignment Offset
-TOTDIST: 106279.0 km - Total Distance
-GLOBTIM: 154896 sec - Global real time
-MOD_SUP_V: 14.40 Volt - Module Supply Voltage
-PSCM_INT_TEMP: 21 °C - PSCM Internal Temperature
-EPAS_MOTOR_CUR: 8.60 Amper - EPAS Motor Current
-VSS: 14.0 km/h - Vehicle Speed
===END PSCM DTC U0401:00-0B===
===ACM DTC None===
Successful DTC reading, no error codes found
Module: Audio Control Module
===END ACM DTC None===
===SCCM DTC None===
Successful DTC reading, no error codes found
Module: Steering Column Control Module
===END SCCM DTC None===
===IPC DTC U0415:00-0A===
Code: U0415 - Invalid Data Received From ABS Control Module
Status:
- DTC Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Instrument Panel Control Module
===END IPC DTC U0415:00-0A===
===GWM DTC None===
Successful DTC reading, no error codes found
Module: Gateway Module A
===END GWM DTC None===
===GPSM DTC U0401:00-8A===
Code: U0401 - Invalid Data Received From ECM/PCM
Status:
- DTC Present at Time of Request
- Malfunction Indicator Lamp is On for this DTC
Module: Global Positioning System Module
===END GPSM DTC U0401:00-8A===
Sponsored
Last edited: