Sponsored

18+ GT Performance Tune Pac

Dans18GT

Well-Known Member
Joined
Sep 14, 2018
Threads
0
Messages
131
Reaction score
84
Location
Modesto CA
First Name
Dan
Vehicle(s)
2018 Mustang GT
Well y'all to the ones who put their kit in and now have to take parts back out to put the missing vent tube in. be careful of the brake booster hose. the one on top with the white clip. The hose has pressure (because of the unnature angle of the connection) on it and the connection is flimsy at best when I went to reattach mine it just snapped off. I wasn't even applying pressure. Makes me wonder how sturdy in the long run this plastic is they made this with. Well guess my car is down for the count and im sure Ill have to pay for the part now. Cant call ford performance because they dont answer phones during covid?? and I cant ever get their chat to work on any device. So communicating through email is rough.. Low gains... missing parts.. and now stuff just snapping off... starting to regret getting this kit.
20200514_124507.webp

20200514_122557.jpg

20200514_122530.jpg
It is a pretty bad design with the way that hose has to S back around to plug in. I can't believe this is the best they could come up with.
Even the other hose fits poorly but at least it's consistent with the rest of the kit.

I'm hoping that with some heat cycles everything relaxes into place before I have to pull it apart to install the air inlet.
Sponsored

 

Dans18GT

Well-Known Member
Joined
Sep 14, 2018
Threads
0
Messages
131
Reaction score
84
Location
Modesto CA
First Name
Dan
Vehicle(s)
2018 Mustang GT
They send you that white 90* elbow too?
The kit definitely needs that elbow.

I'm not all that happy with the fit of the other hose either but they would likely have to remold a whole new hose.
 

NeedForGreen

Well-Known Member
Joined
Aug 8, 2019
Threads
33
Messages
758
Reaction score
519
Location
FL
Vehicle(s)
2019 Mustang GT
I'm still on the fence about ordering this. Waiting to hear more people give feedback on it before I pull the plug.
 
OP
OP
Cobrakit

Cobrakit

Well-Known Member
Joined
May 17, 2019
Threads
28
Messages
416
Reaction score
215
Location
Southern Maryland
First Name
Ken
Vehicle(s)
2019 Mustang GT PREMIUM PP1
This tune is not for everyone, but it is a solid tune. Designed for daily driver crowd and not interested in more engine/exhaust mods. Looks like a10 premium guys might get the most. There are other posts which explain more. I wish it was cheaper (and better connections), but happy with overall performance on street.
 

Sponsored

Dans18GT

Well-Known Member
Joined
Sep 14, 2018
Threads
0
Messages
131
Reaction score
84
Location
Modesto CA
First Name
Dan
Vehicle(s)
2018 Mustang GT
'18 6mt pp1 here and I'm pretty happy with it. Off idle from a stop is a lot better now. The power down low is noticeable and makes normal driving smoother.
I'm seriously surprised at how different the exhaust sounds. I have active exhaust with a resonator delete x-pipe and in track mode I get pops/crackles between shifts, both up and down.
I think it should have been tuned like this right from the start.
 

Erratikmind

Well-Known Member
Joined
Oct 14, 2017
Threads
0
Messages
81
Reaction score
69
Location
Las Vegas/San Francisco
First Name
Andy
Vehicle(s)
'20 GT Prem M6/401A/PP1/MR, '19 Wrangler Unlimited Rubicon
This tune is not for everyone, but it is a solid tune. Designed for daily driver crowd and not interested in more engine/exhaust mods. Looks like a10 premium guys might get the most. There are other posts which explain more. I wish it was cheaper (and better connections), but happy with overall performance on street.
'18 6mt pp1 here and I'm pretty happy with it. Off idle from a stop is a lot better now. The power down low is noticeable and makes normal driving smoother.
I'm seriously surprised at how different the exhaust sounds. I have active exhaust with a resonator delete x-pipe and in track mode I get pops/crackles between shifts, both up and down.
I think it should have been tuned like this right from the start.

The 2 above noted comments pretty much sum up my personal thoughts, as well.

Beware, if you are looking for more than noted and plan to modify down the road.
 

Rpinaiii

Well-Known Member
Joined
Nov 2, 2019
Threads
3
Messages
258
Reaction score
120
Location
Texas
First Name
Ral
Vehicle(s)
2018 Mustang GT
I dont have active exhaust, but the CAI upgrade gives off an awesome low growl on the lower RPMs. Just sucking in air seems like. That improved the sound for me.
.
 

Erratikmind

Well-Known Member
Joined
Oct 14, 2017
Threads
0
Messages
81
Reaction score
69
Location
Las Vegas/San Francisco
First Name
Andy
Vehicle(s)
'20 GT Prem M6/401A/PP1/MR, '19 Wrangler Unlimited Rubicon
'18 6mt pp1 here and I'm pretty happy with it. Off idle from a stop is a lot better now. The power down low is noticeable and makes normal driving smoother.
I'm seriously surprised at how different the exhaust sounds. I have active exhaust with a resonator delete x-pipe and in track mode I get pops/crackles between shifts, both up and down.
I think it should have been tuned like this right from the start.
Which X pipe did you go with?
 

Sponsored

Dans18GT

Well-Known Member
Joined
Sep 14, 2018
Threads
0
Messages
131
Reaction score
84
Location
Modesto CA
First Name
Dan
Vehicle(s)
2018 Mustang GT
I went with the Steeda pipe. It was a good deal at the time, on sale and the first time purchase discount. It's a quality piece but I'm sure there are many others just as nice .
 

LevittownFordParts

Well-Known Member
Diamond Sponsor
Joined
Jun 27, 2014
Threads
37
Messages
2,488
Reaction score
1,331
Location
Worldwide
First Name
Benny & Mitch
Vehicle(s)
S550's!
Hi Guys,

We are sorry to announce that the ETA on the kit's has been pushed back to 6/26 as of today's info from FP.

Since we are continuing to take orders I would recommend you hold your order in place as any available off the shelf inventory will most likely not be available until mid-summer at this rate.

Please let me know if you have any questions and Thank you for your patience,

- Benny
 

LevittownFordParts

Well-Known Member
Diamond Sponsor
Joined
Jun 27, 2014
Threads
37
Messages
2,488
Reaction score
1,331
Location
Worldwide
First Name
Benny & Mitch
Vehicle(s)
S550's!
Hi Guys,

We are sorry to announce that the ETA on the kit's has been pushed back to 6/26 as of today's info from FP.

Since we are continuing to take orders I would recommend you hold your order in place as any available off the shelf inventory will most likely not be available until mid-summer at this rate.

Please let me know if you have any questions and Thank you for your patience,

- Benny

Update guys FP has pushed the ETA back even further to 7/31 at this time. We hope this changes for the better but that is the info we have now.

Sorry,
- Benny
 

SDAMike

Well-Known Member
Joined
Jul 20, 2019
Threads
15
Messages
118
Reaction score
23
Location
NY
First Name
Mike
Vehicle(s)
2019 Mustang GT
Update guys FP has pushed the ETA back even further to 7/31 at this time. We hope this changes for the better but that is the info we have now.

Sorry,
- Benny
On your site it says back ordered to 8/31 now, is that accurate or is it more likely 7/31?
 

LevittownFordParts

Well-Known Member
Diamond Sponsor
Joined
Jun 27, 2014
Threads
37
Messages
2,488
Reaction score
1,331
Location
Worldwide
First Name
Benny & Mitch
Vehicle(s)
S550's!
On your site it says back ordered to 8/31 now, is that accurate or is it more likely 7/31?
Hi Mike,
7/31 is still the ETA for the majority of our backorders. We expect any new orders to most likely take longer to fill so we added some cushion there.

- Benny
Sponsored

 
 








Top