fitment

  1. PP2 Wheels on 2016 California Special GT

    Is anybody running PP2 wheels on there PP1 or California Special? I'm looking for the right fitment for the fronts. Plan on wrapping 285/30/19 for the front wheels (19x10.5) to have it poking less. Does anybody have pics or any recommendations? Please and thank you for the input and guidance in...
  2. Wheel spacing question 2019 Mustang GT

    I just bought and installed RTR wheels. They are 19x9.5 with a 33mm offset in the front (275/40/19). The rears are 19x10.5 with a 45mm offset(285/35/19) I had stock pp1 wheels but added 25mm hub centric spacers all around. I replaced the wheels with the RTR's but did not remove the spacers. I...
  3. Another Wheel Spacer Thread

    Looking for some pics and help from those running 20mm spacers on the front of their cars. Looking into running them on my car that has 19x9.5 +22 wheels on the front. Any help is appreciated!
  4. 345 Rear Tires and 285 Front?

    I'm almost completely ignorant on all of this and really need some guidance. I saw a custom shop posting a couple builds running 345/30/19's in the back and something like 285's in the front and it looked SO good and I really want to achieve that look. Would you guys recommend that on a daily...
  5. Fitment Calculator?

    Are there any fitment calculators out there for front and rear wheels/tires in relation to the fenders? I have a 2021 GT Premium (non PP) on order want to go 265/40r19 in the front and 295/35r19 in the rear (9.5 front, 10.5 rear) but I don’t want to poke or even be flush. I want slight tuck. I...
  6. Ok to rotate same-size tires on staggered wheels?

    I have 305 width tires all around, but my wheels are staggered (10.5 front, 11 back), so the front tires are a little bit meatier. Is it okay to rotate the those front tires from the 10.5" front wheels to the 11" back wheels? The tire/wheel shop that put them on said it is not a good idea, so...
  7. Spacer help!

    I have eibach sport line springs on the way. What spacers should I run to get a nice fitment without rubbing until my wheels come in?
  8. Nitto NT01 tires, 305/30zr19 front, 315/30zr20 back?

    Hello! Newb here. I did do some homework, but still have questions! I'm thinking to get Nitto NT01's for my 350 (non-R), 305/30zr19 on the front, and 315/30zr20 on the back, to deviate from the stock Michelin PSS and try something new. I chose those Nitto tire sizes because they both have (Y)...
  9. Need help with Niche wheels fitment

    I recently got new niche wheels which are 20x9 +35 in the front and 20x10.5 +40 in the rear equipped with 275/35 the front and 295/35 in the rear and I’m on stock suspension The front looks perfect but rear is poking out of the fender wall and I’m not sure if i got wrong wheel size or something...
  10. New wheels offset and tire size

    Hey guys! Very happy to be part of the 5.0 club. Just got a magnetic 2020 GT with PP1 and i am in love with this car!! I definitely would like to invest in a nice set of wheels and im currently looking at a set from Variant Wheels. Im just unsure on the fitment since i am planning on lowering...
  11. Forgestar f14 fitment

    I have a 2020 mustang gt base and I wanna run a forgestar f14 set up preferable 20x9.5 deep concave up front with a 275 and a 20x10.5 or 11 super deep concave and run a 305 in the rear I’m on BMR drag suspension and I don’t want any stretch or camber since I do run the car hard and not a fan of...
  12. 1/2" spacers?

    Anyone know where I can find a good 1/2" spacer that does not require me to replace the factory studs? The only spacers I am able to find are 1"+ and that is just too much. Thanks!
  13. Need help with wheel fitment

  14. Best 23mm Spacers?

    Hi Guys, I am looking to buy 23mm spacers for my Mustang with PP1 rims with Sportline Suspension. I am completely lost and I don't know from where to start. Thank you very much for your help. The best.
  15. Wheel fitment. Help

    Hey guys, So I just lowered the car with the cj pony parts springs. Lowers front by 1.5 and rear by 1.0 Now for Christmas I got a set of SVE wheels that are 20s instead of my factory 19s. What size tires do I need to run? Or is the car to low now for 20s? Do I need spacers? Im attaching...
  16. Tire fitement (Square setup advice)

    I am planning to do a square setup on my 2019 mustang gt. I was planning to do a square/flushed setup with my car (where the car tires aren't poking or tucked inside the fenders). The only mod I currently have are Pedders extreme coilovers (If you are wondering how they are, they change the way...
  17. Best all-season tire for staggered setup?

    I'm currently planning on purchasing a set of Velgen VF5 wheels in a staggered 20x10 +34, 20x11 +45 setup. I need a set of all-season tires since it gets pretty cold in the winter where I'm at and I daily my Mustang year-round. Along with the wheels/tires I am planning on lowering the car 1"...
  18. Riaction Coilovers: Review/Thoughts

    Normally I just read and don’t post much but since I didn’t find any useful information regarding this product here goes nothing! I’ve owned Mustangs in the past (S197 most recently) and I’m well aware of the bigger more well know suspension companies that offer products for Mustangs. When I...
  19. DIY CF spoiler fitment (3M tape)

    I really wanted do some slight modding of my 2018 GT for a long time and for some reason always liked the factory blade spoiler, it's subtle and gives enough contrast to the decklid. The problem is that options are limited and prices high over in europe, so most options are the cheap ones from...
  20. Will it work? 275/35/20 & 305/35/20 on the SVE350’s

    I’m looking at a 20x10 with 40mm offset and 7.07 backspacing setup on all 4 wheels on some Mickey Thompson Street Comp’s running the 275/35/r20 in the front and 305/35/r20 in the rear, I’m curious if I would have any fitment issues with this exact setup on my 2017 mustang GT with stock...
Top