picked up a 16 v6 s550 a while back for less than 10 grand. 3.7 and 6r80. i picked up a f150 coyote for 450 bucks (yes 450 bucks). No issues, engine runs fine when pulled but being that its cheap im gonna hone the cylinders and do the rod bearings just in case for peace of mind. i have a mt82...
Starting a build thread for my base model 2018 Ford Mustang Ecoboost which will be competing in Global Time Attack (Enthusiast class) this season.
I bought it about 6 months ago and have been taking it to every track event I can, from autocross to drifting, open lapping, time trials, etc...
Hey everyone,
I need some help trying to identify the right Shock/Spring Combo for my planned use case.
The plan is to turn my car into a backroad carving daily driver (that can also handle an occasional track day or two since I'm not made of money). I'm trying to narrow down the right...
After being inspired by another GT/CS owner post on here. So this will be the beginning of my build journal for my 2023 Mischievous Purple Mustang GT California Special with a 6 speed.
Some notes on the car in its current state:
It is stock aside from wheels/tires, and an RTR shift knob...
Welcome to the Build Log, where I embark on an exciting journey with my magnificent 2021 Mustang GT California Special! This iconic beauty, adorned in the timeless Iconic Silver hue, was lovingly handpicked during a memorable visit to South Carolina, setting the stage for my extraordinary...
This tread is detailing the current status of my track car build. This is a 2015 manual S550 GT Premium, non performance pack. I just finished my 3rd HPDE.
I really wanted a premium for the fit and finish. The car isn’t anything special, I’ve just curated parts through verified sourced. I’ve...
So I'm looking to build my 2020 5.0 to about 750 crank horsepower. I want to go the Procharger route. But I need a bit of help planning it out so I don't accidentally blow up some other internal parts in the car. I've already picked the tires I want, but I need help with everything else... So...
My last mustang (2020 Ecoboost) didn’t have it. This time, I’m building an EB and I want to add it but wondering if it’s worth the cost. While it used to be like $800, it’s now an extra $1225. I know eco’s are notoriously quiet which I don’t necessarily mind, but does the active exhaust really...
HI! I'm building a Restomod Mad Max car. I have an Australian Ford Falcon and I am using a 2015 Mustang GT as a donor. I am looking for a Right Hand drive Steering rack. I know they are made in the US but can't seem to find anyone that sells them. Any help would be greatly appreciated.
You...
Hey everyone,
I have a 2020 Bullitt basic bolt ons right now with a 93 tune. looking to do a full out N/A Build for max power.
Current Mods:
Kooks 2" Long Tube headers Catted
Corsa Extreme Cat Back
Ported GT350 Intake manifold
93 Tune
Besides Engine Mods what looking for ideal suspension...
Overall end goal mid to high 800s low 900hp to the wheel. With Paxton blower and bolt ons
looking for drive train upgrades what would yall recommend?
my original Thoughts mantic twin disk or McLeod RXT twin disk
Calimer D4 stage 2 MT-82 trans
QA1 carbon drive shaft
DSS half shafts 1500+hp...
Jared’s first Mustang was his 2003 Cobra, which his son Luca claimed before he could even pilot a power wheels. Now, Luca is all grown up and it’s time to [re]build this 800hp monster.
Jared’s first Mustang was his 2003 Cobra, which his son Luca claimed before he could even pilot a power wheels. Now, Luca is all grown up and it’s time to [re]build this 800hp monster.
Hi all,
I need some advice and any input is greatly appreciated.
I have a 19 GT 10R80 Transmission w/stock powertrain. I’m looking at going 800-900HP Forced Induction via VMP. Will run 93 octane. That’s great and all, but I’m looking at making all of that power hit the deck; reliably and...
Anyone know where I can find a good 1/2" spacer that does not require me to replace the factory studs? The only spacers I am able to find are 1"+ and that is just too much.
Thanks!
I'm finally looking at modding my 2019 Mustang GT. I would like to do an intake, tune, and some form of headers/exhaust. My budget to work with is about $3,000. How would you spec it if it were yours?
My initial thoughts were nGauge with PBD 91 and Flex Fuel Tune, JLT Intake, Roush H Pipe, and...
Looking to buy a 2015-2017 GT Automatic and plan on doing a Turbo build with Hellions sleeper kit 800~ RWHP on e85. My main question is this: How important is it to get a performance pack? My goals for the car are a cruise around town weekend/highway cruising car that I do not plan to put on...
Hello all,
This will be my build thread for my 2019 GT. I will update this thread whenever I add a new mod, and try to reply to all questions and comments. You can also follow on Instagram @scarlett5.0
The cars specs are as follows:
2019 Mustang GT Premium Fastback
Ruby Red Tintcoat
401a w/...