TSB for PCV?

RADARB8 · Jul 21, 2016

Tried to search but couldn't find anything. Through previous readings I know Ford changed PCVs on MY16 cars at some point, but do we know when? Is there a place to check my VIN to see if it falls under the TSB, or a way for me to visually inspect to see if I have the new or old PCV?

neodark · Jul 21, 2016

Get a mirror and look under the intake manifold. If you have a barcode, you have the old PCV. If you have a QR code, you have the updated one.

RADARB8 · Jul 21, 2016

If I'm looking for the white and orange tag, mine has the barcode. I assume my options are to either take it to the dealership or do it myself. Can I buy the revised one somewhere?

shelbywannabe · Jul 21, 2016

Why buy it and do it yourself when the dealer does it for free ? TSB 15-0192

jbailer · Jul 21, 2016

In my case, the dealer won't do the work. They won't just do work without a reason. In the case of this one, the TSB is for, "2.3L GASOLINE TURBOCHARGED DIRECT INJECTION (GTDI) -EXCESSIVE EXHAUST SMOKE AFTER EXTENDED IDLE". My car doesn't smoke at idle so they will not do the work.

I still went ahead and purchased the new separator because my understanding is, it was designed for turbo applications. In their words, they say it is or isn't, "equipped with a high flow crankcase vent oil separator system." Since I want better oil separation, I'm doing the work myself.

By the way, the ford part number is: FR3Z-6A785-C
I don't remember the exact cost but I think I spent $28 for that and the set of 4 intake gaskets.

shelbywannabe · Jul 21, 2016

Bummer. Mine did it when I showed them the TSB. I have since added a catch can too

svoman · Jul 21, 2016

Surprised that they wouldnt do the work. Most techs are flat rate and will jump on an easy bit of time. Costs the dealership nothing!

Slow89 · Jul 21, 2016

Put a little oil on the plugs and take it in lol.... But seriously it will work

PewterCam · Jul 21, 2016

Mangrove Mafia said:
Tried to search but couldn't find anything. Through previous readings I know Ford changed PCVs on MY16 cars at some point, but do we know when? Is there a place to check my VIN to see if it falls under the TSB, or a way for me to visually inspect to see if I have the new or old PCV?

This link below has a copy of the tsb and what to look for. It is still well worth it to update yourself if the dealership won't because the updated piece does a much better job of separation.

http://www.mustang6g.com/forums/showpost.php?p=993069&postcount=32

BoostStang · Jul 26, 2016

It's says under the TSB that it's covered under the provisions of new car warranty. I'd be contacting Ford Customer Service.

shelbywannabe · Jul 26, 2016

Agreed. They did mine no questions asked. Just tell them the car starts smoking when you sit in traffic. Thats what I did along with even giving them the TSB number and they just fixed it.

ForYourOwnGood · Jul 26, 2016

Mangrove Mafia said:
If I'm looking for the white and orange tag, mine has the barcode. I assume my options are to either take it to the dealership or do it myself. Can I buy the revised one somewhere?

This thread had me go and look since mine is a very early 16, there is a white and orange tag with a barcode near the PCV but that is not the actual tag stuck to the PCV itself. Mine has a QR code and was really hard to see, took me about 20 minutes with the mirror to find it. Don't know if yours is the same but you might want to double check.

DUNDEM · Jul 27, 2016

I don't have smoke. My car was built in 2/2015. Does this build date guarantee the the old PCV?

dgc333 · Jul 27, 2016

svoman said:
Surprised that they wouldnt do the work. Most techs are flat rate and will jump on an easy bit of time. Costs the dealership nothing!

A TSB is not a recall, the dealer will not get paid by Ford for the work if the car does not meet the provisions of the TSB. The tech may be paid flat rate but they don't make the decision of whether warranty work gets done.

Also, why would you want to do it if your car does not smoke? I subscribe to the principle; "If it ain't broke don't fix it".

SDEcoBoost · Jul 27, 2016

Mangrove Mafia said:
If I'm looking for the white and orange tag, mine has the barcode. I assume my options are to either take it to the dealership or do it myself. Can I buy the revised one somewhere?

You may want to reconsider doing this yourself. I read the TSB, as it also applies to 2015's. Here is the paragraph that concerns me for DIY:

"4. Reprogram the powertrain control module (PCM) to the latest calibration using IDS release 98.03 or higher. Make sure
you are connected to the internet when entering module programming to obtain the latest updates. Calibration files may
also be obtained at www.motorcraftservice.com"

TSB for PCV?

RADARB8

***** Troll

neodark

Left 4cyl @home

RADARB8

***** Troll

shelbywannabe

Well-Known Member

jbailer

Well-Known Member

shelbywannabe

Well-Known Member

svoman

Member

Slow89

Well-Known Member

PewterCam

Well-Known Member

BoostStang

Member

shelbywannabe

Well-Known Member

ForYourOwnGood

Well-Known Member

DUNDEM

Well-Known Member

dgc333

Well-Known Member

SDEcoBoost

Well-Known Member

Similar threads