Sponsored

Search results

  1. UPR Catch Can w/CSS

    I’m in the process of removing the catch can due to a part out can anyone tell me what the part numbers are for the pcv hoses on each side? I have the upr catch can with clean side separator I came up with a few part numbers I’m just not sure what to order is it one of each or two of the first...
  2. Hood rubbing or alignment?

    My hood seems to be rubbing in 4 certain spots I let the hood close under it’s own weight I hold it above the latch push up gently and let it fall Im not sure if this is because of it or if ford needs to adjust something. I put oem ford touch up paint on the spots but it appears to be beginning...
  3. Stripped screw under hood for engine cover

    After an oil change it was late at night I was trying to hurry up and I guess stripped a screw for my engine cover what could be done to fix/repair this?
  4. Coolant Below “Min”

    Purchased 2018 gt in January 2019 I never really paid attention to my coolant granted it’s a brand new car I didn’t think I had to honestly but the other night with a relatively cold motor “car had been sitting almost 6 hours” I took notice to my coolant level being slightly below the minimum...
  5. Vehicle prep for roof wrap

    Shop told me to make sure I clean roof but apply no wax. I washed the car a few days ago and applied some aqua wax like I always do. I plan to waterless wash the roof before I bring it to them. They told me they will be cleaning with alcohol prior to installation my appointment is for next...
  6. Oem 3m Adhesive 5.0 Emblems

    Can anyone tell me where I can source some gloss black 5.0 emblems with REAL 3m adhesive tape I found some on cjs but all the badges with 3m I have experienced all had red backing and 3m written on it. Everything else appears to be double sided tape
  7. Oem 3m Adhesive 5.0 Emblems

    Can anyone link to me real 3m adhesive 5.0 emblems I have had two run ins with cj pony parts and their ford performance emblems but I’m guessing that these are just double sided tape. Can someone verify where I can find 3m adhesive backed ford 5.0 emblems these say 3m adhesive but normally from...
  8. Take a listen

    been noticing this buzzing noise for a while and have no clue to what it is or could be I’m not sure if I recall it happening with the stock exhaust but I’m not sure it appears to be in the gauge cluster area. https://www.dropbox.com/s/42uafd80spqy1iu/IMG_1678.MOV?dl=0 Only at 3k rpms never...
  9. Problem or not?

    i installed the mp concepts upper and lower on my 18 yesterday which fit and look awesome by the way but I noticed something I would have otherwise never seen unless I ever took the bumper off for whatever reason. I am showing before and after pictures I rubbed a considerable amount off with...
  10. 18gt rear seat creak

    creaking rear seats when I go over uneven ground dipping into and out of driveways I have read a few threads but none show where to lubricate I verified it is the seats by driving with the rear seats down and it goes away can anyone tell me where to apply this grease I also have a sprayable version
  11. Before I Dispute

    Does anyone have any kind of way to get mf auto designs attention regarding a product that isn’t acceptable to be put on my car? I have tried Instagram and email I’m losing my patience and I’m about to start a dispute with my credit card company. This was fresh out of the packaging I don’t want...
  12. Mf auto ‍wow just wow

    Not sure where to post this but i have been trying to reach out to the company for days now even when I ordered it I tried to reach out to them with the same treatment. I have a coyote badge that I kept in the plastic packaging until I was ready to install it which was just a few days ago and I...
  13. Remote start

    I woke up this morning ready for work and stepped outside to see just how far the remote start works in my apartment complex so I hit it and not paying attention to my key fob I just listened for the car and didn’t hear anything. So I tried it a few more times like 3-4 times and just gave up and...
  14. Corsa xtreme fitment on 18gt

    Had the corsa catback installed a few days ago thinking it would fit better than the mbrp catback I had before with it being twice the price it is also wanting to sit close but not touch I mean not even a full finger gap. on both passenger and driver sides but it’s worse on the passenger side...
  15. 18gt mbrp race catback

    Today while cruising if I lightly stab the throttle in say 4th gear I get an exhaust flutter type noise into the cabin it sounds to be over the right muffler area I’m gonna jack it up tommorow any ideas on what to look for? I have had it on the car for quite some time and never noticed this...
  16. What can I do to clean it?

    So brand new mbrp race exhaust I guess this is whatever lube etc that was left from factory it will not come off what can I use that won’t damage or harm the stainless steel or degrade it? i have already taken nevrdull to it with no results I called mbrp and they tell me it will eventually go...
  17. Should I return it?

    So I installed the accelatec decklid on my 18 yesterday followed bills video to the tee and still seem to end up with a small gap on both left and right side of my decklid I also had to put noticeable force down the bottom of it to get the holes to line up for me to screw them in. Is the ford...
  18. Mbrp race catback

    I installed the mbrp race catback on my 18gt last night and around 6k rpm I hear a raspy tone/noise coming from just the right muffler area but not from the left any ideas what I can do? Otherwise the exhaust seems to be just fine it wasn’t installed on ramps so not the best room but I made it...
  19. Intake opening.

    Does anyone know offhand the size of the intake opening on the 18gt? I know the throttle body is 80 but I was looking into what throttle body is best if any at all because I would be porting the opening of my manifold to match whatever size it is. I was thinking they would match but I wanted to...
  20. Normal?!

    Diode dynamics map lights installed. Maybe I just never noticed with the stock lights? https://www.dropbox.com/s/0wjjyy67uopd6hc/IMG_0921.TRIM.MOV?dl=0 Is that pause during start then come back on then go away for good normal?


Top