Search results

Need help. MT82 just took a dump. I don't know exactly what's broken but I noticed a hole in the bell housing where it looks like something shot out of the transmission. Driving 5mph, in first gear rolling down a hill, all of a sudden I hear what sounded like rocks bouncing around in a tin can...

Has anyone heard of AMP? Has anyone built their transmission with this Kit?

What's in the motor? Forged rods and pistions? Is the crank forged too?

I wanna run more boost without having to worry about my motor being on the edge. Couple people say just run E85 it'll keep you safe and you can run more boost.. yeah but then I'll be on the edge with my stock internals. Not sure if I trust anyone to build my motor around here so I'm thinking...

Not my car. One of my friends has a 2011 GT. He put a 2015 short block in it, with his 11 heads, car has a whipple making 12 to maybe 13lbs at times on pump gas. Car was running for 2 to 3 years with this setup until the top of the piston broke. I've never seen anything like that. His car made...

My catch can is vented with the filter on top. Is it normal for the filter to have smoke coming from the filter at idle? I had the hood up and hit the gas and noticed more smoke coming from the filter as I pressed the gas. It's not really smoke it's like a vapor. I can sometimes smell it in the...

Hope I didn't blow this bitch up. Did a couple pulls tonight with some friends. Noticed oil spitting out my breather cap on top of my catch can. Normally it blow a little smoke but they say that normal but this time the filter was soaked in oil. Is this something I should be concerned about...

As much as I want to enjoy these cold temps.... I realize my boost is increasing as the weather gets colder. I saw 12.5 before 7000 rpms lastnight in 5th gear. 12.5 , 13lbs... is that to much boost on 93?

It's getting cooler out here. Car feeling really good sucking up this cold air but I'm looking for more power as usual. I havea 2015 MT82 car vortech V7JT supercharger, 3.33 pulley 18 intake, longtubes and with a torque booster. I was mixing a full tank of 93 with 2 gallons of leaded 110 race...

I recently had the 5030-137-1-CSS UPR paxton/vortech oil separator. It only catches oil on the passenger side and has a clean side on the driver. I noticed a little oil coming out the driverside when I ran a blower guard without the JLT intake. Also noticed a little bit of oil inside my JLT cold...

I have a vortech V7JT blower .I just did like probably 4 hard pulls on the highway racing a friend of mine. I took the jlt cold air pipe off and put my turbo guard on. First time I ever did it. I also have the upr catch on the passenger side and the clean feed on the driverside. I spoke to Steve...

Can you run E85 with ID1000's and a fuel system?

Broke diff bolts doing a 60 roll. 3rd to 4th gear. No wheel hop. Shifted to 4th and it broke. Bk051 with the upgraded hardware bolt kit and it still broke smdh. Spoke to BMR and the recommended the BK054 with the upgraded hardware bolt kit. Has this happened to anyone else with the upgraded bolt...

Anyone installed these bushings on their car? Pros and cons? I hear they have some NVH. How bad is it? Thanks

Broke diff bolts doing a 60 roll. 3rd to 4th gear. No wheel hop. Shifted to 4th and it broke. Bk051 with the upgraded hardware bolt kit and it still broke smdh. Spoke to BMR and the recommended the BK054 with the upgraded hardware bolt kit. Has this happened to anyone else with the upgraded...

I don't dig at all because I break shit so all i do is rolls. 20, 40, 60. Problem is I spin in 1st and 2nd gear so I can't do a 40 roll. I've bought summer tires and they don't last or hook so I bought a 315 35 20 all season tire. It hooks just as good as a summer tire and last longer. My...

Is the Gold heat resistant tape worth it? Does it keep inlet temps down? I have a vortech V7JT supercharger. I was thinking about wrapping the cold side and hot side. Has anyone tired it yet? Is it worth it? Thanks

I'm completely new to the drag pack world. I don't know what wheels to get, tire size or wheel size. I'm not trying to break the bank. The cheaper the better.I was thinking about a 18 on the back wrapped with a toyo 888r 305 35 18 and a skinny on the front. Don't really care about looks. Just...

I hear the jlt cold air pipe is restrictive so I bought a K&N filter to go over the inlet. Has anybody used one? Any gains in boost or hp/tq?

Anybody using the upr oil catch can for vortech/paxton blowers with a turbo guard? I'm trying to figure out what hose I need to block off. I was told I had to buy the clean side when I purchased the oil separator for the blower. The JLT cold air pipe has a hose that runs from the cold air pipe...