Steeda suspension parts

[HybridGT]

We've got a bunch more parts rolling out of manufacturing in the coming weeks, can't wait to share them with you guys!

There's MORE...? :eyebulge:

Sponsored

 

[Todd15Fastback]

There's MORE...? :eyebulge:

Shocks and struts for sure....At least that is what my gut is telling me

 

[David@Steeda]

There's MORE...? :eyebulge:

Yes!

[MENTION=11611]Nanashii[/MENTION] Thanks for posting that, Yassen!

 

[Blitz]

Nice parts list and write up!

thanks!! hope it helps some body

 

[Blitz]

I am not sure if it was adjusted during the alignment but your bumpsteer kit looks off. It seems like you have all the spacers in there which is not necessary. You want that bottom nut to be a couple of turns past the last thread. Also, with the OEM balljoints, the least change in toe occurs with the rod end near the top of the stud (remove spacers from the top). That's what we found out during my alignment.

This is what mine looks like after the alignment.

Much appreciated, of course thats when i installed it:frusty:... it was all redone when i rolled it back to the shop :cheers:

 

[Blitz]

Yes!

@Nanashii Thanks for posting that, Yassen!

Shocks and struts!!!

 

[Blitz]

Update: Driving with these mods is a whole other world!!!
I've done a lot of track riding on bikes and the only think that really gets me going is hard cornering a loud noises.

GT stock suspension was impressive for what it was compared to 14. I had the previous model that I traded for this.

GT with steeda packed performanced...

No body roll, no steering upset, no wheel hop, harder acceleration in corners and very satisfying to drive!! I can take those long on ramps a lot faster and harder than i use to... not that i should be... but other than the butt dyno feeling.. the madder my girlfriend is in the passenger seat the better the car is performing!!

 

[Blitz]

any more parts coming??

 

[Evolvd]

Their dampeners should be released soon...I'm guessing they are still in the testing phase.

 

[Todd15Fastback]

any more parts coming??

CC plates and shocks and struts should be out soon.

 

[Niz55]

I hope the shocks and struts are adjustable. I still,have my bump steer kit sitting on my table. Just waiting for Steeda shocks and struts to come out so I can install all at once.

 

[Brice80]

Why the switch from Eibach Pro Kit to Steeda Progressives? I'm hoping to lower mine in before end of year, and steeda progressives are looking to be the option. just wanted to see if you had a particular reason

 

[BluByeU]

Subscribing...looks like I will be addressing the suspension before any major mods to the engine. Great write-up Tony!

 

[David@Steeda]

We're working very diligently on new mods

From our caster camber plates to our shocks and struts, and a few more which we won't mention just yet ;)

If you haven't checked out our jacking rails, they're flying off the shelves!

 

[jbailer]

Subscribing...looks like I will be addressing the suspension before any major mods to the engine. Great write-up Tony!

That's the way I did it. Addressed the suspension first so it would handle better. That's important even with the stock power. Now I'm into the power goodies.

Of course I'm still looking forward to Steeda's shocks and struts!

Sponsored