Oil Filter Drain

[Cobrakit]

Traded my 19 GT PP car in for a Darkhorse. I kept the plastic oil filter drain tray, thinking it would work on the DH, but it didn't. I always made a mess when removing the coil filter. The DH is different in that area, as well as the oil pan/plug. Long story short, anyone having same trouble with removing their oil filter and if so interested in my tray, $25 shipped. PM.

Sponsored

 

[compprep]

Might have better luck in the FOR SALE section!!

 

[Sig556]

If you can't get in there just put a plastic zip lock bag over the filter when you remove it. The bag will catch the extra oil and allow you to remove the filter without as much mess. Just hold onto the bag its pretty slippery.

 

[TonyT930]

Might have better luck in the FOR SALE section!!

Maybe not. I'm buying it from him.

 

[Joe Gonsalves]

Traded my 19 GT PP car in for a Darkhorse. I kept the plastic oil filter drain tray, thinking it would work on the DH, but it didn't. I always made a mess when removing the coil filter. The DH is different in that area, as well as the oil pan/plug. Long story short, anyone having same trouble with removing their oil filter and if so interested in my tray, $25 shipped. PM.

Where did you obtain that?

 

[Cobrakit]

It was made by someone on this site, Sold on ebay, but no longer. Try searching general forum somewhere around late 2020-early 2021.

 

[Farkel]

3D printed by Jon @pilotgore. He also makes very nice oil filler funnels.

 

[pilotgore]

3D printed by Jon @pilotgore. He also makes very nice oil filler funnels.

Thanks for the shout out, unfortunately that piece didn’t come from me. My oil filter guide is more tubular and only fits gt350’s and gt500’s.

 

[Cobrakit]

Orginal post. OP (of funnel) hasn't been on since 2021.

PP1 oil filter funnel | 2015+ S550 Mustang Forum (GT, EcoBoost, GT350, GT500, Bullitt, Mach 1) - Mustang6G.com https://share.google/gxXlhhTs8mqJCsM1l

 

[Farkel]

Thanks for the shout out, unfortunately that piece didn’t come from me. My oil filter guide is more tubular and only fits gt350’s and gt500’s.

My mistake. That's what I get for assuming. You did sell me one that I still use on my PP1 though.

 

[PoCoBob]

The print file for this, or something similar has been on the Thingyverse for years. I've downloaded the file but have never found anyone with a big enough printer to print me one.

There's the link if you want it. https://www.thingiverse.com/thing:4289771

 

[pilotgore]

My mistake. That's what I get for assuming. You did sell me one that I still use on my PP1 though.

I just looked back at our messages from 2021. Looks like I sold you an oil adding funnel, which I make for all fords and many more cars/trucks. The oil filter guide that they’re referencing isn’t one of mine unfortunately.

 

[Cobrakit]

Sounds like somebody (pilotgore) should look into the feasability of making more, wink, wink ! If your intetested, post your interest here. I just sold mine.

 

[Farkel]

I just looked back at our messages from 2021. Looks like I sold you an oil adding funnel, which I make for all fords and many more cars/trucks. The oil filter guide that they’re referencing isn’t one of mine unfortunately.

Had to look back almost 5 years. The filter funnel I got is from Justin @JT2020. Sorry about my confusion.

 

[Cobrakit]

Orginal thread is called out here on post #9.

Sponsored