What did you do to your S550 Mustang today?!

[Weyland-Yutani]

Awww, of course that's all they did. From what I've seen on here, that almost never works long term and vct solenoids are in your future lol

It lasted 9 days. Now it's dookie again. I should take it back, but I may just do it myself.

Sponsored

 

[ice445]

It lasted 9 days. Now it's dookie again. I should take it back, but I may just do it myself.

It's not hard per se, but passenger side requires you to remove the high pressure pump to remove the valve cover. There was a thread recently from someone else doing it somewhere with tips.

 

[acemastr]

Finished up the interchiller and got it filled... sub ambient intake temps woo!

 

[Paul McWhiskey]

Finished up the interchiller and got it filled... sub ambient intake temps woo!

How does that work?

Serious question. Not trying to be a smart ass.

 

[acemastr]

How does that work?

Serious question. Not trying to be a smart ass.

It uses the ac freon inside a chiller that is added to the ac system and the supercharger coolant is passed through it. Simple, yet complicated lol. It's the same thing the dodge demon came out with years ago that everyone raved about.

 

[JB60]

Nice sunny day washed and shined it up , drove home after work and parked in garage for rainy weekend

 

[Fusion Training Systems]

Finally posting pics.
First pic is with Steeda Progressive springs, front Steeda Pro Action Adjustable struts along with rear Viking Warriors.

Second pic is with Steeda Minimum drops, Steeda front Pro Action adjustable front struts along with Steeda rear Pro Action adjustable shocks.

I couldn’t handle all the noise the Vikings were making and how “Loose” the rear end felt.

Car feels so much better and zero noise.

 

[Trolly1]

Replaced the B&O sub with a Polk DB1042 DVC. The difference in bass quality is quite significant, especially with a quality source. Whoever had the car before me really chewed up the trunk rear trim panel so I took it out and sanded out (as best I could) the cuts, scrapes and deep scratches. I tried a flat black paint for plastics but the areas I sanded really stood out so I removed the paint in the test area and used a Rustoleum flat black bed liner paint. 2 coats completely hid the areas I sanded as well as other imperfections in the panel. It looks better than the picture and has a very durable finish to prevent future scuffs, scratches etc.

 

[LCK22GT]

Installed a Steeda ordered tune for high octane and CAI, replacing the generic tune that's preloaded in the SCT BDX. Running nice in neutral in the garage.

 

[Adam the Lighting Guy]

Well, what I did today (and across the last few days) was not directly related to my GT or Ecoboost. I put my garage somewhat back together after having the floor redone. Now, overhead racks, and some additional shelving as well as paint the walls and ceiling are next. All to have a proper home for the GT.

 

[tomservo92]

I cleaned the dry flow filter on my Airaid CAI today. Thrilling stuff, I know.

 

[Trolly1]

I cleaned the dry flow filter on my Airaid CAI today. Thrilling stuff, I know.

It’s still a good feeling!

 

[gone_n_60]

I checked my battery tender, checked the temp in the garage <35. Brrrr. Snow tomorrow and next 5 days temps won't break 25 degrees. Midwest winter break. Oof.

 

[MyStang]

My baby is still sleeping six weeks to go before wake her up !

So i picked this up to drive in the winter.

 

[MAGS1]

My baby is still sleeping six weeks to go before wake her up !

So i picked this up to drive in the winter.

How do you like it so far?

Sponsored