What did you do to your Mach 1 today

[Nickel]

The dual rates are amazing. Love mine.

So it does look like they are stiffer than HP springs. I might have to explore these. I love the car already so to make it feel even more like a cup car would be great.

Sponsored

 

[TallyMach1]

How were you able to pop new LED bulbs in? did you have to remove entire black case or just pop circular covers out?

Thanks Anthony

You have to pop the round lense covers out. Ford changed the design of the map light console (2018+ I think) and if you try to remove it, you'll destroy the plastic tabs that the metal clips bite into.

 

[monte87]

You have to pop the round lense covers out. Ford changed the design of the map light console (2018+ I think) and if you try to remove it, you'll destroy the plastic tabs that the metal clips bite into.

Thanks for reply. TALLYmaxh1. Appreciate it.
Anthony

 

[First Stang]

Added an overlay to the front. Didn’t get the alignment right (shadow effect) but I’ll keep it for now.

 

[Zelek]

How were you able to pop new LED bulbs in? did you have to remove entire black case or just pop circular covers out?

Thanks Anthony

I had to remove the whole black piece since I couldn't get the bulbs out.

 

[Krankenstein]

Wrapped the dash bezel in a high gloss carbon fiber vinyl. I wanted to see what it looked like and if I liked it before buying a real one. For $30 and a few hours of my time, I am pretty happy with the results. Think I'll stick with it as is for now and swap to a real one down the road when I order my custom steering wheel.

 

[Pipefittermax]

Wrapped the dash bezel in a high gloss carbon fiber vinyl. I wanted to see what it looked like and if I liked it before buying a real one. For $30 and a few hours of my time, I am pretty happy with the results. Think I'll stick with it as is for now and swap to a real one down the road when I order my custom steering wheel.

Where did you get the wrap from?

 

[Krankenstein]

Where did you get the wrap from?

Got it two 1x5ft rolls from Amazon and followed a couple DIY videos on youtube that were on it.



VVIVID Epoxy High Gloss Carbon Vinyl Automotive Wrap Film DIY Easy to Install No Mess (1ft x 5ft, Black)
https://www.amazon.com/VVIVID-Epoxy...8-2-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1

 

[SheepDog]

Has anyone in here done Differential bushing inserts that are specific to the MACH1? I'm considering just doing the back 2, with grade 12.9 bolts and leaving the front 2 stock. Hoping this combination would prevent the OEM bushings from breaking and tighten up the slop, but still allow the front Bushings to soak up some NVH.

 

[MAGS1]

Got it two 1x5ft rolls from Amazon and followed a couple DIY videos on youtube that were on it.



VVIVID Epoxy High Gloss Carbon Vinyl Automotive Wrap Film DIY Easy to Install No Mess (1ft x 5ft, Black)
https://www.amazon.com/VVIVID-Epoxy-Carbon-Automotive-Install/dp/B01B3FAYLA/ref=sr_1_2_sspa?crid=2TO5R7EAK1C&dib=eyJ2IjoiMSJ9.vPjo0OQWKDBbS6CieloDEUbRhzRSh43EjHJD1M5-OrxfKXI7m6jaq1xKzcjOp4BPsWDAyJZhx4N1G_y7sHp5C1zhIow9e-hsfR58m9wW4sCOnMiYl1tNX_EKgT1dsKXg3njAw7M6K1f9gjV8suQ5t8ieU1jsVNZyA3Wyb94JvX8F43lkvLGbHRxt_3BfwoYPlczbm0R85T7ot8NufI9viDOBpk64r7-h4LMLxusvRHbfVVJhZGCresYjCnRwO9Nw5gSLnwiYI0TBDtHg-bKCapIyJnRNRiT9Sp0KDjnF2ew.XtBD3WBOlP24UAl3M1dA1owMeGuu3Ycr5K0KACTORi4&dib_tag=se&keywords=carbon+wrap&qid=1721741883&sprefix=carbon+wrap,aps,111&sr=8-2-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1

VVivid makes good vinyl. I’ve actually got the dry carbon vinyl in my cart, your post is inspiring me

 

[RowdyRam]

VVIVID Epoxy High Gloss Carbon Vinyl Automotive Wrap Film DIY Easy to Install No Mess (1ft x 5ft, Black)
https://www.amazon.com/VVIVID-Epoxy-Carbon-Automotive-Install/dp/B01B3FAYLA/ref=sr_1_2_sspa?crid=2TO5R7EAK1C&dib=eyJ2IjoiMSJ9.vPjo0OQWKDBbS6CieloDEUbRhzRSh43EjHJD1M5-OrxfKXI7m6jaq1xKzcjOp4BPsWDAyJZhx4N1G_y7sHp5C1zhIow9e-hsfR58m9wW4sCOnMiYl1tNX_EKgT1dsKXg3njAw7M6K1f9gjV8suQ5t8ieU1jsVNZyA3Wyb94JvX8F43lkvLGbHRxt_3BfwoYPlczbm0R85T7ot8NufI9viDOBpk64r7-h4LMLxusvRHbfVVJhZGCresYjCnRwO9Nw5gSLnwiYI0TBDtHg-bKCapIyJnRNRiT9Sp0KDjnF2ew.XtBD3WBOlP24UAl3M1dA1owMeGuu3Ycr5K0KACTORi4&dib_tag=se&keywords=carbon+wrap&qid=1721741883&sprefix=carbon+wrap,aps,111&sr=8-2-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1

Looks like a possibility for me as well if I could find a "turned aluminum" type vinyl. I love the look but I've only ever seen this type trim in Performance Packs/Bullitts.

Granted, I haven't taken a deep dive into vinyl options out there for what I would like to do.

On edit, I'm not sure it's an option given the stretching and such that would be necessary to do this on dash panels. I'd think that would make the circles elongated and look odd.

I think I talked myself out of it

 

[VictorH]

Added KPM fuel pump (plug and play) except for one fitting (have to swap bottom side-tank fitting) and then added Radium 6 micron fuel filter (not plug and play at all).

 

[Prodigal]

Looks good! Any zoomed out shots?
Is this the gt350 track spoiler?

Here you go,

 

[TallyMach1]

Drove over to Steeda to get dual rate springs and toe links installed to finish out my suspension mods.

 

[MACHtobers Very Own]

Drove over to Steeda to get dual rate springs and toe links installed to finish out my suspension mods.

How was that experience? I'm working on planning a road trip to maybe do this at Valdosta for springs/sway bars.

Sponsored