Post Your Bead Porn

[Justpassingas]

Not exactly bead porn

Sponsored

 

[Skye]

Gyeon PPF Wash and PPF Maintain.

PPF Wash is a mild decon wash, to be used once every few months. On first use, I could tell it was different. The water and light reflected, showed in ways I hadn't seen before.

PPF Maintain is a sealer for PPF. Gyeon's instructions are to spray some on a microfiber towel, then apply to the PPF and rub until slick. I spray on a microfiber towel and slow walk it across the panel, allowing it to flash dry (takes about 15 secs). Then, using the same damp side of the towel, I rub until slick. Finally, I take another dry microfiber and rub the panel down. You'll know if you missed a spot: it will feel like you're dragging your towel across concrete. Shows and protects very well, with little fading of hydrophobic performance over time.

 

[XFactor7889]

 

[kilobravo]

Skye, I'm interested in the sealer but the forum didn't like your media files.

 

[Skye]

Sorry for that. I believe I should have loaded them as MP4, not MOV. When you have a moment, try again.

 

[kilobravo]

Yep, .MP4 is the accepted file format, Skye and the hood rinsing clip works but not the sealer.

FYI, lots of folks start a YooToob channel, (it's not difficult,) upload there and then, post links. But, any way you slice it, dealing with video is a PITA for the author.

 

[tosha]

Sweatin

 

[Bulutt]

Sweatin

Awesome. What is on your car?

 

[tosha]

Awesome. What is on your car?

Thanks. Gtechniq crystal serum ultra applied couple years ago, and sprinkled with gtechniq c2v3 earlier this year for maintenance.

 

[tosha]

I'm pretty happy with the coating so far. After a good wash, car still looks like it was dipped in liquid glass.

 

[Järn]

Some Ruby Red beading from the new graphene routine!
All the new products I used:
303 Products: Clay Mitt with Speed Detailer, Finishing Polish, Graphene Nano Spray Coating
Adams Iron Remover
AQUA CREST Inline Water Filter
And a new Ryobi One+ variable speed dual action polisher.

Notes:
1) This is the first time I have polished the car in 4 years of ownership. I love the results.
2) I was not too fond of the clay bar fold and squeeze routine, so I only did it once. Clay Mitt is easy.
3) So far a very nice upgrade from a simple wash and wax with Meguiar's Hybrid Ceramic.

A big shout out/thank you to @DFB5.0 and others (@kilobravo ...) for all you guys are doing in this forum!

 

[kilobravo]

Happy to help, Tony and your Ruby Red girl is looking good. :-)

 

[skinnyb]

Gyeon CanCoat EVO and Carpro DLux for the win

 

[Bulutt]

Just a light shower

 

[skinnyb]

Light shower here this morning as well

Sponsored