What did you do to your S550 Mustang today?!

[mrgooden]

Today I installed the Ford Performance Bullitt style fuel rail covers along with the Bemaro decals in white. Kind of expensive for something that's partially blocked by the strut brace, but that's ok. This engine needs all the help it can get

Where did you get the fuel rail cover decals?

Richard

Sponsored

 

[Scooter MGee]

Where did you get the fuel rail cover decals?

Richard

https://www.bemarofilms.com/product-page/engine-plaque-powered-by-ford-overlay

 

[mrgooden]

https://www.bemarofilms.com/product-page/engine-plaque-powered-by-ford-overlay

Thank you!

Richard

 

[mrgooden]

Time to change that 710 fluid I hear so much about.

Richard

 

[TrackMustang]

Placed an order…

 

[PeterParker]

Put on the WM metal black chrome 2.3 turbo badges. Gotta say that they look pretty damn good, especially in person.

 

[SJM12]

Katzkin leather installed. Black with red stitching, barracuda red perforated inserts.

 

[usmade75]

Put her in a car show today. Placed mid pack in the top 40.

 

[VIPR01]

Placed an order…

Is that the Bullitt Front Brake kit? Just picked that up also for a 17 GT - hope it clears the 19 Project 6GRs….

 

[Mustangmatty]

Placed an order…

Let me know what luck you have with the lines. Bought the same kit and tried passenger front first. Threads in caliper fine but could not get it to start chassis side. Fluid dripping everywhere so I gave up. Stock lines are fine for now.

Oh and inspect rotors right away. Mine were beatin to death from Ford (not a Steeda issue).

 

[TrackMustang]

Is that the Bullitt Front Brake kit? Just picked that up also for a 17 GT - hope it clears the 19 Project 6GRs….

Yup, that’s Bullitt. I have the Project 6GR Sevens 19/10 and have been assured they clear the Brembo kit. The wheels I picked clearing the brakes and allowing the car to be lowered and not have to run spacers is part of why I picked them.

 

[TrackMustang]

Let me know what luck you have with the lines. Bought the same kit and tried passenger front first. Threads in caliper fine but could not get it to start chassis side. Fluid dripping everywhere so I gave up. Stock lines are fine for now.

Oh and inspect rotors right away. Mine were beatin to death from Ford (not a Steeda issue).

Absolutely will check, thanks for the heads up. I hope the lines work, let’s see!

 

[Joe B.]

Oil change and tidy up the engine bay. I drove it this past winter.
My rant, I wish the filter manufacturers would standardize the diameter. I have two filter cup wrenches that "almost" fit the filter. Just how many do I need? And the V6 filter is in a tight spot.

 

[James1980]

Today I installed the Ford Performance Bullitt style fuel rail covers along with the Bemaro decals in white. Kind of expensive for something that's partially blocked by the strut brace, but that's ok. This engine needs all the help it can get

I pulled the oil neck off since I'm no longer running the cover. Much better
What have you guys done with the stud for the engine cover? Does it come out easily?
You can see it there at the top of the picture. I wouldn't mind not seeing that

 

[VIPR01]

Yup, that’s Bullitt. I have the Project 6GR Sevens 19/10 and have been assured they clear the Brembo kit. The wheels I picked clearing the brakes and allowing the car to be lowered and not have to run spacers is part of why I picked them.

Copy on the Project 6GR sevens, that’s what I have on also - staggered.

Sponsored