What did you do to your S550 Mustang today?!

[JohnnyGT]

So how does the car feel with all of the new goodies?

Amazing so far. But I've only put about 30mi on it. Mostly just doing laps of highway clovers.

With the cold temps and the stock tries I haven't pushed it too hard yet. But its feels nice and flat in the corners. The turn in is awesome! It's overall solid and stiff feeling now. Very connected.

Saturday we should be seeing temps in the 70s. I plan on putting a couple hundred miles on and really check things out.

10/10 would highly recommend.

Sponsored

 

[JohnnyGT]

I kept the stock sway bars because I wanted to see if they would even be necessary with the much higher spring rates.

I have some more goodies on the shelf, but holding off on those for now.

 

[HoosierDaddy]

Amazing so far. But I've only put about 30mi on it. Mostly just doing laps of highway clovers.

You still have them? I am envious! They got rid of all of them here. Give map coordinates for my next vacation.

 

[Rilla]

Thanks to the guys over at Wheelkraft NW in Vancouver, I now have calipers to match the graphics on my GT.

Did you buy decals for the brembo sign?

 

[JohnnyGT]

You still have them? I am envious! They got rid of all of them here. Give map coordinates for my next vacation.

LOL...D.C beltway: 495. You have zero reasons to be envious.

 

[ice445]

Banished to the garage for 4 months as we just had our first snow in the valley today lol

 

[TheYankeeMarshal]

Did you buy decals for the brembo sign?

After they powder coat them I think they put new ones on them. It is included in the price, but I would have been just as happy if they left them off. I don't need to do free advertising for Brembo.

 

[shogun32]

You still have them? I am envious! They got rid of all of them here. Give map coordinates for my next vacation.

he lives on the one over-pass street that has a clean 4-loop. I go out there at 11-2am and do laps for 20 minutes.

38.834506, -77.218097

 

[DarrenJ]

I had to replace the passenger side cv axle seal. Dealership quoted me 500+ for the job. said it would take three hours labor and wanted to keep the car for 3 days. Something didnt add up so i said F it and bought the seal the friction modifier and a new axle nut for about 25 dollars and two bottle of royal purple 75w90 and did it myself. Job is a major pain the the ass though lol.

 

[Gnatsum21]

At Steeda in Pompano.. H-Pipe install.

 

[2morrow]

At Steeda in Pompano.. H-Pipe install.

I would love to check out both their facilities some day.

 

[Gnatsum21]

I would love to check out both their facilities some day.

Sounds like a Wolf now. Noice.

 

[EmCel]

Silly me. I drove over some yellow paint on the highway and it splattered all over the back and a little under the car. Not sure how I did it tbh because tires are fine. I didn’t notice it really until I came home and parked. Was like wtf!!! I haven’t pressure washed it yet because I tried getting it off another way then got tired not sure if pressure wash will help tho I’ll see later. Warm water/soap and rag didn’t help, rubbing alcohol/hydro peroxide didn’t help, edge of a credit card and some lube helped. Pressure washing it not yet.

 

[Mustang_Lou]

You may need to wet sand and buff that paint off.

 

[Gnatsum21]

Silly me. I drove over some yellow paint on the highway and it splattered all over the back and a little under the car. Not sure how I did it tbh because tires are fine. I didn’t notice it really until I came home and parked. Was like wtf!!! I haven’t pressure washed it yet because I tried getting it off another way then got tired not sure if pressure wash will help tho I’ll see later. Warm water/soap and rag didn’t help, rubbing alcohol/hydro peroxide didn’t help, edge of a credit card and some lube helped. Pressure washing it not yet.

GooGone?

Sponsored