schmeky
Well-Known Member
- Joined
- Apr 7, 2019
- Threads
- 54
- Messages
- 708
- Reaction score
- 712
- Location
- West Monroe Louisiana
- First Name
- David
- Vehicle(s)
- 2018 Mustang GT
- Thread starter
- #1
Replacing various bolts on my spare Gen3 long block build. I understand Torque to Yield fine, which is easy enough.
When the manual says (for instance) 177 inch pounds, then 28 inch pounds, I understand this as taking it to the 177 inch mark in increments, then going an additional 28 inch pounds, then the final step is Torque to Yield.
Correct?
Looking at an electronic Torque to Yield gauge, the mechanical ones look flimsy.
When the manual says (for instance) 177 inch pounds, then 28 inch pounds, I understand this as taking it to the 177 inch mark in increments, then going an additional 28 inch pounds, then the final step is Torque to Yield.
Correct?
Looking at an electronic Torque to Yield gauge, the mechanical ones look flimsy.
Sponsored