Sponsored

On3 s550 Single

Zelek

Well-Known Member
Joined
Feb 11, 2016
Threads
101
Messages
4,763
Reaction score
4,621
Location
Round Rock / Hutto, TX
First Name
Matt
Vehicle(s)
2021 Mustang Mach 1
Mine were warped by more than a 1/4 inch... the replacement was even warped.

20210225_001616.jpg
Yeah, you'd have to get that one planed unfortunately. That's the first thing I'm going to check before I get it ceramic coated.
Sponsored

 

Veteran

Well-Known Member
Joined
Aug 12, 2018
Threads
19
Messages
369
Reaction score
250
Location
Italy
Vehicle(s)
2020 GT white
Yeah, you'd have to get that one planed unfortunately. That's the first thing I'm going to check before I get it ceramic coated.
you'd have to remove too much material though.
No pride in their product !
Pity as on3 could do well with just a bit more effort.
 

Zelek

Well-Known Member
Joined
Feb 11, 2016
Threads
101
Messages
4,763
Reaction score
4,621
Location
Round Rock / Hutto, TX
First Name
Matt
Vehicle(s)
2021 Mustang Mach 1
you'd have to remove too much material though.
No pride in their product !
Pity as on3 could do well with just a bit more effort.
Yeah, it's a crapshoot at this price point. If you get manifolds that fit well, you're gold with the single kit. The rest of it is much easier to install than the twin kit. I definitely have my concerns with some of the stuff but I also didn't want to spend $12,000 on a Hellion twin top mount.
 

armykyle1 [HACKED ACCOUNT

Banned
Banned
Banned
Joined
Mar 20, 2016
Threads
74
Messages
1,849
Reaction score
620
Location
Gulf Coast
Vehicle(s)
2018 GTPP premium
Yeah, you'd have to get that one planed unfortunately. That's the first thing I'm going to check before I get it ceramic coated.

You should be able to get that milled flat without issue. Plus with the MLS gaskets, you'll be fine.
 

Ishyne22

Active Member
Joined
May 28, 2019
Threads
0
Messages
42
Reaction score
17
Location
Manchester, NH
First Name
Ross
Vehicle(s)
2018 Mustang GT PP - 2016 F150 5.0 ST - 2004 Ram SRT10 - 2003 Brickyard Nissan 350z TP
You should be able to get that milled flat without issue. Plus with the MLS gaskets, you'll be fine.
Nah that one was too far gone. They swapped it out. I have a mill but that one after milling would have left no more flange.
 

Sponsored

Zelek

Well-Known Member
Joined
Feb 11, 2016
Threads
101
Messages
4,763
Reaction score
4,621
Location
Round Rock / Hutto, TX
First Name
Matt
Vehicle(s)
2021 Mustang Mach 1
Flanges on mine were good. I was able to lay a yardstick flat on both and put both manifolds on each other with no visible gaps at all. Both flat. I sent the hot side parts and turbine housing to get ceramic coated in black.
 

Ponderthis

Boost Loading...
Joined
Apr 24, 2016
Threads
58
Messages
622
Reaction score
241
Location
Senoia, GA.
First Name
Chase
Vehicle(s)
2015 GT Premium
Vehicle Showcase
1
Purchased my on3 single kit on Feb 14th, Was told a month later a few days ago on March 15th that my kit was still 5-6 weeks out...
 

Ishyne22

Active Member
Joined
May 28, 2019
Threads
0
Messages
42
Reaction score
17
Location
Manchester, NH
First Name
Ross
Vehicle(s)
2018 Mustang GT PP - 2016 F150 5.0 ST - 2004 Ram SRT10 - 2003 Brickyard Nissan 350z TP
Purchased my on3 single kit on Feb 14th, Was told a month later a few days ago on March 15th that my kit was still 5-6 weeks out...
Sounds about right
 

wazslow

Well-Known Member
Joined
Oct 10, 2014
Threads
13
Messages
596
Reaction score
497
Location
PA
Vehicle(s)
2016 Mustang GT/CS
Purchased my on3 single kit on Feb 14th, Was told a month later a few days ago on March 15th that my kit was still 5-6 weeks out...
I thought you had a hellion setup?
 

Zelek

Well-Known Member
Joined
Feb 11, 2016
Threads
101
Messages
4,763
Reaction score
4,621
Location
Round Rock / Hutto, TX
First Name
Matt
Vehicle(s)
2021 Mustang Mach 1
Crazy, I got my 15-17 kit in 3 days after I ordered.
Sponsored

 
 




Top