What did you do to your S550 Mustang today?!

[gadgtfreek]

Installed first Mod- FP Oil Separator.

Great customer service and fast shipping from Benny @LevittownFordParts

Mines sitting here to do, need to get on it...

I added clear silicone to a few spots around this grill, damn things are known for popping off and mine does regularly. Good and secure now, ready to keep the speaker protected.

Sponsored

 

[Modulom4]

Some carbon goodies

WOW!

 

[GMONSTAH]

Poltergeist GT...!

 

[MNstang]

Got gas...

2.20

added Coyote badge and FP hood vents.

Hood looks great - can you post a picture of the car with the coyote badge you used? I've been looking at them...

 

[TicTocTach]

Got a call from Discount Tire that my 305/30-19’s came in early, so I made a couple trips over lunch to drop off the 11” wheels, plus the stock 9” wheels where the autoX tires were mounted. A couple hours later I had empty 9” wheels, autoX tires on 10” wheels, and the fresh 11’s and 305’s on the car. Unfortunately it rained all day and I don’t have any pictures to show for this sprint...

 

[samd1351]

They are the MMD carbon fiber mirror covers and MMD fog bezels, Over all they fit great. Carbon fiber is a tad see though but its not a biggie. The splitter is Anderson composites ac front splitter which i love and fits great

Thanks for the info. One last question. Does your front splitter have the support rods, and can you get a couple of pics of the front?

 

[Rapid Red]

Yeh, Ford officially sells these now.

Wonder if they have the Blue oval uplift ?

 

[Solteka]

1/21/2021:

I installed a UPR Dual Valve Catch can, it was not as easy to install as I thought but the tutorial videos on youtube and on the forums helped a lot.

I took a test drive after install, no CEL or other problems. I will wash and vacuum the car later today.

 

[MM_GT]

Installed Redline Tuning Hood Struts

 

[ArtieTheOneManParty]

Today I drove it in the snow for the first time (and probably the last). It was just flurries, but the closer to home I got, the worse it got, still only minimal coating. A half mile from my house, there was a head on collision, so the road was blocked, which meant about a 4 mile detour. I turned around, started going the other way, and WHOA! A little throttle sends me sideways. Full white knuckles the rest of the way, but thankfully made it home in one piece.

 

[ArtieTheOneManParty]

Tires?

Stock, Pirelli P Zero Nero, 23K miles

 

[br_an]

Today I drove it in the snow for the first time (and probably the last). It was just flurries, but the closer to home I got, the worse it got, still only minimal coating. A half mile from my house, there was a head on collision, so the road was blocked, which meant about a 4 mile detour. I turned around, started going the other way, and WHOA! A little throttle sends me sideways. Full white knuckles the rest of the way, but thankfully made it home in one piece.

I'm guessing you don't have winter tires. For winter I'm using Bridgestone Blizzak WS90s, and put a little weight in the trunk. They make a HUGE difference. If you live in an area that sees snow/ice during the colder months, and still want to drive your mustang, get some winter tires!

 

[Mach VII]

Stock, Pirelli P Zero Nero, 23K miles

You have stock Pirelli's with 23K on them?
That's astounding in it's own right.

 

[Mustangpursuit]

Found a GT/CS straight script image online and sent it to a custom hi temp caliper decal printer on etsy and got time to put them on today when it was warm outside.

 

[dn1984]

changed the oil, and fixed the annoying loud rattling noise i had at highway speeds. turns out my driver side plastic rocker panel/side sill was missing some push pins and was flapping around. popped some new push pins in, rattling noise gone. not sure why i didn't check this before.

Sponsored