What did you do to your S550 Mustang today?!

[Smunczen]

I had the Ford Performance power pack II kit installed today on my 20 PP2 car today. So far very happy.

Sponsored

 

[MM_GT]

Installed 4" to 8" Screen Upgrade. The stock USB hub in my 2020 base works with the new system. Now I need to get the Drive Mode switch working.

Also installed the PP1 dash panel and gauges. I connected the gauges to the plug located behind the radio screen and they both function without modification.

 

[raptor17GT]

Installed 4" to 8" Screen Upgrade. The stock USB hub in my 2020 base works with the new system. Now I need to get the Drive Mode switch working.

Also installed the PP1 dash panel and gauges. I connected the gauges to the plug located behind the radio screen and they both function without modification.

nice install - what did you have before the gauges, just the three air vents? Wonder if this would work on a RHD UK GT model.... if the cabling is there or more likely not..

 

[WD Pro]

nice install - what did you have before the gauges, just the three air vents? Wonder if this would work on a RHD UK GT model.... if the cabling is there or more likely not..

I think the problem is getting the RHD trim piece with the four holes I've asked before but maybe something has changed - Maybe the UK Mach 1 will get the four which will then open the door for this mod ?

WD

 

[MM_GT]

nice install - what did you have before the gauges, just the three air vents? Wonder if this would work on a RHD UK GT model.... if the cabling is there or more likely not..

I had the 3 vents. Not sure about the UK model.

 

[GMONSTAH]

...

 

[MM_GT]

Enabled Drive Modes with Forscan

 

[Dave2013M3]

Finished the heat extractor install

303 really keeps the trim pieces nice doesn't

I think I am going to take my engine cover off as well...its hideous.

 

[Rapid Red]

I think I am going to take my engine cover off as well...its hideous.

No truer words posted LMAO ....That thing did not last a day on my car.

It is so ugly I will not even hang on the wall.

 

[DougS550]

I just got my 2019 back from the Body Shop. MP GT350 hood, Anderson Carbon Fiber front vented fenders and Viceez GT500 Bumper. My new Forged wheels haven't come in yet

 

[samd1351]

I just got my 2019 back from the Body Shop. MP GT350 hood, Anderson Carbon Fiber front vented fenders and Viceez GT500 Bumper. My new Forged wheels haven't come in yet

Very interesting rear louver. Could you post a few more pics of that?

 

[FreePenguin]

I installed mishimoto radiator today for my ecoboost. I was able to remove it without removing intercooler lol. I simply used a little multi tool and chopped the legs off the old radiator, mishimoto comes with attachable legs so I attached them once I had everything secured. Found out I have a exhaust leak so I need a new clamp, for my downpipe below car. No big deal.
Took me 2 hours.

Question. My car used to stay 185-225, wit the new radiator, it cools down to 175. Is that going to be a problem? It is when the thermostat opens, and it just drops down to 175. I’ve never had my engine cool that low before other than warming up.

just opinions. Thanks. You can’t overcool an engine yeah? I assume Itl just keep thermostat closed, but if when it opens thermostat, is 175 anything to be worried about.

 

[cactus_kid]

I had the Ford Performance power pack II kit installed today on my 20 PP2 car today. So far very happy.

Glad your worked. Mine didn't. I have '21 software as the car is a late build 4th qtr. Sucks !

 

[Smunczen]

Yes got all done. The hardest part was removing the sound enhancement tube. So I’m very pleased with it.

 

[cactus_kid]

Sponsored