JohnVallo
1 5 4 8 3 7 2 6
- Joined
- Feb 9, 2015
- Threads
- 49
- Messages
- 362
- Reaction score
- 598
- Location
- Venice, FL
- Website
- racersreunion.com
- First Name
- John
- Vehicle(s)
- '16 GT350, Shadow Black, Whipple Supercharged
The FluiX rear diff cover is now installed, and ready for some temperature tests.
The carrier w/New Diff rear cover ready to go into my car.
Carrier: (Iron Housing, 3.73 Gear w/Torsen) Car: (2016 GT350)
The Install went smoothly and the fit is very nice.
Here's a picture of the Clearance between the rear of the cover and the subframe. About 1" of clearance.
Picture of carrier installed before Exhaust went back on.
Here is finished installation with everything buttoned-up. Now I will be doing some temperature comparisons and tests against my previous readings from the "Stock OEM Cover"
One thing is for sure: This is a nice looking piece!
The carrier w/New Diff rear cover ready to go into my car.
Carrier: (Iron Housing, 3.73 Gear w/Torsen) Car: (2016 GT350)
The Install went smoothly and the fit is very nice.
Here's a picture of the Clearance between the rear of the cover and the subframe. About 1" of clearance.
Picture of carrier installed before Exhaust went back on.
Here is finished installation with everything buttoned-up. Now I will be doing some temperature comparisons and tests against my previous readings from the "Stock OEM Cover"
One thing is for sure: This is a nice looking piece!
Sponsored
Last edited: