What did you do to your S550 Mustang today?!

[compprep]

Forgestar wheels and Nitto tires...much better than the PP1 stockers!!!

What size & offset FS wheels and tires please? Had those on my S60 for a while, love the nice simple 5 spoke design.
TIA. Jim

Sponsored

 

[Mustang_Lou]

Velossa Tech Big Mouth but am still very skeptical that water won't be an issue.

Do it I say. Look where the Velossa is. Quite a bit below the actual intake. No way it's getting sucked all the way up against gravity, past the filter, and into the engine. Plus EVEN if anything made it that far, it'd be nothing but a mist by the time it entered the combustion chambers and there are actual water injection kits that PURPOSELY spray a mist of water to reduce charge temps.

I love mine. Cooler air sooner is always a good thing.

 

[wcharon]

Your car looks like it’s a PP1 from the rear spoiler. If so make sure the front wheels clear the Brembo calipers. Most places wont take the wheels back once tires are mounted on the wheels.

Yes correct it is a PP1. Perfect. Thanks for the advise. I will try them tomorrow.

Looks good!

Thanks.....

If they work, it is going to look beautiful.

Thanks. Will post pics as soon as my tires come in.

 

[Lord Polymath]

Gave her a bath!

 

[Schwerin]

Finally got around to installing my Steeda extreme G-trac brace.

 

[rum_punch_ruby]

Ordered my Lund tune and updated the firmware on the Ngauge

 

[m3incorp]

Removed the emblems. I forgot about the 2 holes when I was putting together my custom emblems........looks like they just might barely cover those holes. I'll find out tomorrow. just finishing clear coating them and will put them on tomorrow.

 

[GMONSTAH]

Drove around fast ‘cause I don’t give a crap and cops aren’t eager to pull folks over.

 

[Mrummel1989]

I put the Ford Performance Street X lowering springs on my ‘18 PP1.

Haven’t testing and handled but I did get on the brakes hard from 45 mph and nose dive already eliminated. Love the look!

 

[RIBS]

Nothing. dang virus lockdown! Be safe And healthy!

 

[vtchopperdude]

What size & offset FS wheels and tires please? Had those on my S60 for a while, love the nice simple 5 spoke design.
TIA. Jim

20x9.5 +40, 275/35
20x11 +55, 315/35

 

[psoto13]

Took a chance with some ebay GT500 side skirts and absolutely love the results.

 

[rum_punch_ruby]

Buttoned up everything after my recent installs and now just waiting on my initial tune file from Lund to start getting it dialed in.

Once that's done she'll get cleaned up one last time and listed for sale

 

[vtchopperdude]

Added some underhood dress-up plastics and coolant overflow tank! If anything, it lowers the hp, but it looks good, hahaha.

MMD radiator plastic extensions
JLT master cylinder cover
JLT shock tower covers
Mishimotor coolant overflow reservoir

 

[Issues]

Busy day. Installed Steeda lca with extended stud, . Steeda Bump steer rod ends. BMR CB006 k member brace. Built 4 level pedestals high enough to access the tie rods. String alignment and check chassis for square. (It's perfect ) while I was under there I adjusted parking brake and wiped down the undercarriage. Took it for a high speed run. Steering is much more responsive. Although it feels great now , next week I'll be setting up the laser and mirror to dial in the bump steer. I have plenty of time these days.

Sponsored