18usc371
Well-Known Member
- Joined
- May 14, 2019
- Threads
- 11
- Messages
- 293
- Reaction score
- 219
- Location
- Naples, FL
- First Name
- Jim
- Vehicle(s)
- GT350 - Track Package - G0628
Done! This was so easy thanks to all your input, tips, pics, etc. Thanks!
Started out with a Dremel, but quickly just used a sharp utility knife to cut the dash. Nice clean cuts too. I didn't even need to completely remove the radio/climate face-plate to remove the display and pop out and route the 4-pin connector for the gauges. Complete plug and play on the '19.
Up next, 4" to 8" Sync conversion . . .
Started out with a Dremel, but quickly just used a sharp utility knife to cut the dash. Nice clean cuts too. I didn't even need to completely remove the radio/climate face-plate to remove the display and pop out and route the 4-pin connector for the gauges. Complete plug and play on the '19.
Up next, 4" to 8" Sync conversion . . .
Sponsored