New Recall For The IPC 2019

[HoosierDaddy]

I didn't need an account, I just used the link above. Not sure what may have happened? Were you able to use it? Or forced to create an Acct?

No problem using that link and I have no account. Ford probably doesn't think that particular function was worth enough to put it behind a pay wall.

Sponsored

 

[Bullitt0819]

I checked ETIS, and got "No Campaign Message(s) found" So, so far, my car isn't affected (or was fixed by the dealer prior to delivery).

 

[cmxPPL219]

I checked ETIS, and got "No Campaign Message(s) found" So, so far, my car isn't affected (or was fixed by the dealer prior to delivery).

And let's hope it stays this way for the rest of the time you, me and everyone else owns their cars!

 

[el-guapin]

I checked ETIS, and got "No Campaign Message(s) found" So, so far, my car isn't affected (or was fixed by the dealer prior to delivery).

Got the same!

 

[hws52]

Thanks for this info, hot off the presses.

When mine was new, while driving, it went blank for a few moments, then turned back on. No issues since - knock on wood. (This is the downside of all these electronics technology - Reliability)
One other Awesome guy on here - jmorris47 - had what sounds like this exact problem (Not sure if his production dates fell within this range)

Unrelated, but I wonder if some reprogramming can be done for some late 2018MY and now 2019MY production cars - many folks on other forums and threads on here, report not having an Oil Temp gauge, myself included. Let's see if Ford issues a TSB or something similar for that, in near future.

I've got a '18 GT Premium 401A non-PP and the digital dash oil gauge is pressure only.

 

[d1zguy]

Well my IPC on my 19' just turned it'sef off on the high way for 15 seconds then started back up lol

 

[cmxPPL219]

I've got a '18 GT Premium 401A non-PP and the digital dash oil gauge is pressure only.

Yeah, from what info is out there, it's some late MY2018 production run vehicles onward to MY2019, when the "problem" was noticed - what's your Manufacture date?

 

[hws52]

Yeah, from what info is out there, it's some late MY2018 production run vehicles onward to MY2019, when the "problem" was noticed - what's your Manufacture date?

5/18

 

[Hadelson]

Two issues with my 19GT 401A all in the last two weeks and its a September 2018 build. While toggle through modes, Dash completely black out for approximately 5 seconds. Today under a moderate 2nd gear pull, the tach froze at 4500RPM. Going back to Ford dealer

Sponsored